DAVRON DTI-1001
The DTI-1001 conveyor oven is used to cure a coating on steel components used in the automotive industry. The coating is screen printed robotically on each part prior to the cure oven. Parts are lo...
DAVRON DTI-1003
The DTI-1003 Curing Tunnel Oven is used to cure a coating on copper wire used in the manufacturing of electric motors. The cooper wire is one spool and is pulled through the oven chamber by a take...
DAVRON DTI-1011
The DTI-1011 conveyor oven is divided into four individually heated zones of control. Each zone is heated by a modulating natural gas fired burner system. The conveyor belt is a wire mesh woven typ...
DAVRON DTI-1061
The DTI-1061 stress relieving conveyor oven operates in a continuous manner at approximately 8′ per minute. The oven is used to stress relieve spring bundles used in the furniture industry. The o...
DAVRON DTI-1098
The DTI-1098 Continuous Conveyor Expanding Oven is designed to provide six (6) zones of temperature control along the length of the system. All zones are heated by independently controlled modulati...
DAVRON DTI-1113
The DTI-1113 curing conveyor oven operates in a continuous manner. The curing oven chamber is divided into two (2) individual zones of control to allow more flexibility for the process requirement...
DAVRON DTI-1134
The DTI-1134 custom continuous scorching system is used in the manufacturing of disc brake pads. The system utilizes two (2) heated platens. Each platen contains twelve (12) rod heaters to heat the...
DAVRON DTI-1138
The DTI-1138 industrial oven is a thermoforming solution that preheats interior components used in the automotive industry. Product can be loaded on the oven conveying system with an automated pic...
DAVRON DTI-1139
The DTI-1139 industrial oven is a a thermoforming solution that preheats interior components used in the automotive industry. Product can be loaded on the oven conveying system with an automated p...
DAVRON DTI-1140
The DTI-1140 Indexing Conveyor Oven System is used to heat treat steel components used in the automotive industry. The system includes 1 oven, 1 quench tank, 1 rinse tank, and a pick and place syst...
DAVRON DTI-1144
The DTI-1144 conveyor oven cures automotive disc brake pads after press forming. The press formed parts are manually loaded from the presses into the conveyor oven to provide continuous product flo...
DAVRON DTI-1160
The DTI-1160 indexing conveyor oven is used to temper alloy steel rods after a chroming process. The rods are used in the manufacturing of automotive suspension systems. The rods are loaded vertica...
DAVRON DTI-1171
The DTI-1171 custom continuous scorching system is used in the manufacturing of disc brake pads. The system utilizes a custom infrared heating fixture designed specific for the application. The hea...
DAVRON DTI-1175
The DTI-1175 custom indexing conveyor oven is used to cure disc brake pads for the automotive industry. The oven utilizes a compact design to allow maximum production in a small footprint. The sys...
DAVRON DTI-1200
The DTI-1200 Overhead Monorail Conveyor Oven System is used to heat a polypropylene product used in the automotive industry. The overhead monorail conveyor oven described here is the oven located o...
DAVRON DTI-1213
The DTI-1213 indexing conveyor oven is a thermoforming solution that is used to preheat a composite material blank prior to press forming. The composite material blank is used in the manufacturing...
DAVRON DTI-1214
The DTI-1214 Infrared Shuttle Oven is a specialized thermoforming oven system preheats automotive textile products prior to press forming. This oven system utilizes one manual product shuttle. The...
DAVRON DTI-1220
The DTI-1220 Infrared Indexing Conveyor Oven is a heated chamber with pass-through oven conveyor. The conveyor system indexes to keep pace with the production rate. The conveyor belt is a flat wire...
DAVRON DTI-1230
This curing tunnel oven is used to cure an adhesive component on filter media used in the automotive industry. The curing tunnel oven was designed to accommodate an existing conveyor system that wa...
DAVRON DTI-1244
The DTI-1244 indexing conveyor oven pre heats interior components used in the automotive industry. Product can be loaded on the oven conveying system with an automated pick-and-place system or manu...
DAVRON DTI-1251
The DTI-1251 indexing conveyor oven is used in the testing of sensors utilized in the automotive industry. As the parts are heated in the oven chamber gases internal to the parts expand. The oven s...
DAVRON DTI-1253
The DTI-1253 is an indexing furnace system for annealing automotive engine components that operates with a 99.8% pure inert atmosphere. Parts to be processed are placed on the oven entrance shuttle...
DAVRON DTI-1255
The DTI-1255 provides a horizontal across airflow to heat this particular product. The design velocity accounts for the pressure drop through the product to provide an efficient process. The system...
DAVRON DTI-1276
DAVRON DTI-1283
The DTI-1283 provides a vertical down airflow to heat this particular product. The design velocity accounts for the pressure drop through the product to provide an efficient process. The system’s c...
DAVRON DTI-1286
The DTI 1286 Expanding Oven is a multi-zone conveyor oven and includes eight (8) zones of independent temperature control. The DTI 1286 Cure oven includes three (3) zones. Each zone is heated by th...
DAVRON DTI-1295
The DTI-1295 is designed to meet the above requirements. The stack of material to be heated is placed on a scissor table that automatically indexes upward each time a blank is removed from the stac...
DAVRON DTI-1302
The DTI-1302 provides a horizontal across airflow to heat this particular product. The design velocity accounts for the pressure drop through the product to provide an efficient process. The system...
DAVRON DTI-1305
The DTI-1305 heats two different types of material (automotive carpet and barrier layer) within a single oven system. The system automatically orients each component, heats and then shuttle conveys...
DAVRON DTI-1307
On the entry end, the lift conveyor is fully cantilevered conveyor bed, offering two open sides for load access. This counter weighted system, raises the product up to match the level of the upper ...
DAVRON DTI-1308
The DTI-1308 system provides a combination of radiant heat followed by forced convection from both above and below the product web. This controlled thermal process provides the required heating cyc...
DAVRON DTI-1326
The aluminum top shuttle conveyor moves in between the load position and heat position. Two adjustable timers allow the load and heat duration to be changed as needed. 15 independently adjustable I...
DAVRON DTI-1340
DTI-1340 is a stacked carpet preheat line that pulls two materials from rolls, cuts them to length and indexes them through two different heating processes. After heat, the two parts are then combi...
DAVRON DTI-1354
Conveyor speeds, fan speeds, and temperatures are set on the HMI touch screen and controlled through the PLC. Unbaked dough is extruded onto the stainless wire mesh belt and baked on its way throug...
DAVRON DTI-1371
The DTI-1371 provides a vertical down airflow to heat this particular product. The design velocity accounts for the pressure drop through the product to provide an efficient process. The systems co...
DAVRON DTI-1372
The DTI-1372 design velocity accounts for the pressure drop through the product to provide an efficient process. The systems conveyors provide a stable surface to support the product and is open to...
DAVRON DTI-1388
DTI-1388 consists of four zones of heat with each zone containing one natural gas burner and two circulation fans. The water/oil vapors are condensed and reclaimed at the air-to-air heat exchanger,...
DAVRON DTI-1392
Product is conveyed through the heating and cooling sections on swinging trays connected to oversize roller conveyor chain and large sprockets. Pneumatic grippers steady the trays in the load and u...
DAVRON DTI-1399
The DTI-1399 oven and transfer conveyor system design does not required any special foundations or floor pits for installation. The control system includes PLC control of the ramp and soak temperat...
DAVRON DTI-1407
A constant stream of material is extruded onto the Teflon conveyor belt. The upstream conveyor belt roller can be extended up to 24” to meet the extruder head without changing the overall length of...
DAVRON DTI-1410
Product is conveyed through the heating and cooling sections on swinging trays connected to oversize roller conveyor chain and large sprockets. Pneumatic grippers steady the trays in the load/unloa...
DAVRON DTI-1412
On the entry end, the lift conveyor is a fully cantilevered conveyor bed, offering two open sides for load access. This counterweighted system, raises the product up to match the level of the upper...
DAVRON DTI-1417
The DTI-1417 provides a vertical up and down airflow to heat this particular product. The design velocity accounts for the pressure drop through the product to provide an efficient process. The sys...
DAVRON DTI-1423
DTI-1423 is an indexing conveyor oven. Parts are loaded and unloaded on the conveyor manually and the number of parts conveyed into and out of the oven during each index is set on the HMI depending...
DAVRON DTI-1424
The DTI-1424 provides top and bottom IR heater banks to heat this particular product. The system conveyor provides a stable surface to support the product and is open to allow process air and IR he...
DAVRON DTI-1434
The crosslinking oven is fed by up to three individual extruders, arranged in a fan shape. At the entrance of the first conveyor, adjustable stainless turning bars, direct the extrusions onto the c...
DAVRON DTI-223
The DTI-223 continuous conveyor oven dries ceramic slurry as part of a lost foam casting process. A foam blank is saturated with a ceramic slurry mixture and is placed on a conveyor belt for drying...
DAVRON DTI-226-100
The DTI-226-100 conveyor type oven cures adhesive on automotive drum brake linings. Adhesives are applied to the inside of the pre-cured linings to be used for bonding in a later process. Parts ent...
DAVRON DTI-226-200
The DTI-226-200 indexing conveyor oven is used for pre-curing automotive drum brake linings. This conveying system is designed to work in conjunction with a roll mill and automated cut-to-length s...
DAVRON DTI-226-300
This conveyor oven cures drum brake linings clamped in form fixtures for the proper shape. The heated chamber is divided into four independent zones of temperature control. Airflow within the oven ...