IEMCA MASTER 865-12 F
These models offer an extremely compact design, with high magazine capacity allowing extended uninterrupted production.
IEMCA MASTER 865-12 MP
Designed for maximum flexibility, with the ability to rapidly switch between different bar diameters requiring little operator's service. This is the ideal bar feeder for those lathes where machini...
IEMCA MASTER 865-12 P
These models offer an extremely compact design, with high magazine capacity allowing extended uninterrupted production.
IEMCA MASTER 880/12/MP
IEMCA MINI BOSS 338/20 HD
IEMCA MINIBOSS 332
IEMCA PRA 100-F
IEMCA PRA 52-F
IEMCA PRA 52-P
IEMCA PRODIGY 552
IEMCA TRILOGY 332
The TRILOGY 332 is designed for Swiss type lathes for applications from .118” to 1.259” (From 3 mm to 32 mm).
IEMCA VIP 65E-II
LNS ALPHA SL 65S
Automatic Magazine Bar Loader For Spindle Length Bar Stock on Fixed Headstock Lathes Capacity: 1/4” through 2-5/8” * not to exceed overall length of spindle Bar Length Capacity: 12" to 61"* (*) Ma...
LNS Alpha ST320
Automatic Magazine Bar Loader for sliding headstock lathes to run capacities: Capacity: 1/8” to .787” (3 mm to 20 mm, 25 mm with bar preparation) diameter x 12’ 6” bar length
LNS EXPRESS 220
Automatic Magazine Bar Feed for 12' bar stock used with sliding or fixed headstock turning machines For bar stock from .079” to .787” (2 mm to 20 mm), 1.02” (26 mm) maximum with bar preparation
LNS EXPRESS 220 S2
Loading 2 mm to 4 mm diameter bars, can be difficult for many bar feeders. However, not for the Express 220 S2 automatic bar feeder. It reliably loads small diameter bar stock using exclusive loadi...
LNS Express 332
Automatic Magazine Bar Loader for Swiss style or fixed headstock lathes to run 12’ bars in diameters of 1/8” to 1-1/4” 2 Models available: 6’ or 12’ ** Capacity: 1/8” to 1-1/4”
LNS EXPRESS 332 S2
LNS GT 112-E
LNS HYDROBAR SPRINT S3
Automatic Magazine Bar Loader for Fixed headstock Lathes Capacity: 1/2” to 3-1/8” Bar length capacity: 12 foot 6 inches
LNS QUICK LOAD SERVO S3
Automatic Magazine Loader For Spindle Length Bar stock on Fixed headstock Lathes Capacity: Bar Diameter: 1/4” to 4-3/4” * Bar Length: 5” to 63” ** *Not to exceed overall length of spindle
LNS QUICK SIX
Six Foot Automatic Bar Feed for Fixed Headstock Lathes Capacity: 3/8” to 3-1/8” * Length: 6’ Foot Bar stock
LNS QUICK SIX S2+
LNS QUICKLOAD SERVO 80 S2
LNS Sprint 565
Automatic Magazine Bar Loader for fixed or sliding headstock turning machines Bar Diameter: 1/4” to 2-1/2” (5 mm – 65 mm) Bar Length: 12’ 6”
LNS SPRINT 565 S2
LNS SPRINT S3
The Sprint S3 is an automatic magazine bar feeder designed to safely handle a complete range for small, medium and large diameter permitting large production runs. The Sprint S3 robust design and t...
LNS TRYTON 112
PIETRO CUCCHI COMPACT
PIETRO CUCCHI STANDARD
PRO MEGA 580
1. No special requirements or restriction on material straightness. 2. No limit on spindle rotating speed, performance in high rpm speed. 3. Speed of lathe spindle can be maximized. 4. Flexible of ...
PRO TECH 998
1. Equipped Mitsubishi servomotor and AX2N PLC. 2. Multi-parameter setting function, indication of feeder status and position. 3. Human Machine Interface and user-friendly operation. 4. Portable re...
PRO VS-65
1. No special requirement or restrictions on material straightness. 2. Accommodation raw bars. 3. Lathe spindle speed can be maximized. 4. Flexible on raw bar shape such as round, hexagon, oval. 5....
SPINNER SERVO 42-3200
Our SERVO 42 barloader offers - quick loading of bars up to 42x3200mm - storage of multiple bars - unloading remaining rest end of bar material back to barfeeder into separate box - pushing of the...
SPINNER SERVO 51-3200
Our SERVO 51 barloader offers - quick loading of bars up to 51x3200mm - storage of multiple bars - unloading remaining rest end of bar material back to barfeeder into separate box - pushing of the...
SPINNER SERVO 80-1500
Our SERVO 80 barloader offers - quick loading of bars up to 80x1500mm - storage of multiple bars - unloading remaining rest end of bar material to working area - pushing of the bar by CNC-axis for...
