The Mini-Vac is a compact vacuum filtration system for removing solid contaminants from water-soluble oils, synthetic coolants, mineral seal oils, and heavier cutting oils. Its compact, self-contained design allows easy installation in confined areas. Wheel-mounted Mini-Vacs can be rolled anywhere in your plant to clean the average machine sump quickly and effectively.

MiniVac Vacuum Filter

With flow rates from 5-350 gpm, and operating vacuum up to 15" Hg, Mini-Vac filters can handle virtually any size machine tool. Fines down to 1 micron are removed. This level of filtration efficiency has been proven to double or triple machine tool life, and extend the life of the cooling and

Contaminated liquid from machines is either pumped or drained into the Mini-Vac filter reservoir. Next, velocity and gravity draw liquid downward to the filter media, where solids are retained. Clean liquid is drawn through the filter medium at the bottom of the dirty reservoir by the Mini-Vac pump. From the clean liquid vacuum chamber, the liquid is continuously pumped to the machines. Automatic operation is controlled by a pre-programmed filter cycle; media is rotated when a pre-set vacuum is reached. The flight conveyor and disposable filter media move a predetermined distance, usually a couple of inches. During the short index cycle, liquid is drawn from a reserve tank to ensure a continuous supply to machines.lubricating fluids indefinitely. Machine tool uptime increases because of fewer tool changes, and less maintenance.