CANTEK CFS-100
- 사양사양을 미터법으로 변환동력10 hp
- 제품 개요
An economical and high-speed approach to defect cross-cutting with partial optimization.
The Cantek CFS100 Automatic Defect Cutoff Chop Saw is the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 18” blade provide for effortless cutting from 11.8” (w) x 2.75” (t) or 5.9” (w) x 3.9” (t). An optional feature is available for cutting thin material down to 0.078” (2mm) which is ideal for lamellas for engineered flooring.
For flooring companies, the CFS100 can be combined in-line with our EM12 End Matcher for a highly efficient defecting & end matching solution.
Why Cantek CFS100 Automatic Defect Cutoff Chop Saw?
- Ideal for the defect cutting wood mouldings, wood flooring, finger joint blocks, wood paneling and more!
- Machine scans for defects marked with a florescent crayon allowing for high-speed defecting
- Provides 3 to 5 times higher production rate than manual cut-off saws.
- 5% increase in material yield over manual cutting operations
- +/- 1mm (0.0393”) accuracy
- Safe operation with automatic feeding and comprehensive safety guards
- Partial optimization with sequential and fixed part cutting functions or simply cut out defectsKey Advantages
• Ideal for the defect cutting wood mouldings, wood flooring, finger joint blocks, wood paneling and more!
• Machine scans for defects marked with a florescent crayon allowing for high-speed defecting
• Provides 3 to 5 times higher production rate than manual cut-off saws.
• 5% increase in material yield over manual cutting operations
• +/- 1mm (0.0393”) accuracy
• User friendly touch screen control with on board synoptics, cutting counter, and menu
based cutting modes
• Servo driven feed motor for fast accurate motion and position control
• Compact design requires less space than manual cutting setups
• Adjustable automatic trim of front and tail of the workpiece
• Defect blowing system combined with computerized logic control permits the blowing
time and the length of defect to be set as desired - 회사에 관하여
대리점와(과) 서비스 및 수리 숖
- 대리점17EX-FACTORY Metal, A Division of: EX-FACTORY INC.
1805 Sardis Road North
Suite 107
Charlotte, North Carolina 28270
미국 - 서비스 및 수리 숖1