CLEARING 3000 TON HYD FORGING PRESS
3000 Ton, 18" Stroke, 50" Stroke, 60" x 60" Bed, 75 HP
EUMUCO SP100C
DAYLIGHT 700 mm STROKES 85 n°/min STROKE 250 mm TABLE SIZE 1.240 x 850 mm RAM SIZE 790 x 790 mm TABLE ADJUSTMENT 17,5 mm UPPER EJECTOR STROKE 20 mm LOWER EJECTOR STROKE 25 mm ENGINE POWER 60 cv
FUJICAR PCF-630-65-70
Hot Forging Press Make : Fujicar, Japan Model : PCF-630-65-70 Year : 1980's Capacity : 630 Ton Slide stroke : 200 mm Speed : 100 SPM Die height : 490 mm Slide adjustment : 12 mm Bolster size : 650 ...
FUKUI MSF 1000
USED FUKUI 1,000 TON MECHANICAL SINGLE CRANK COLD FORGING PRESS, Stock# 11057, Year: 1991
HYDRAULIC FORGING PRESS 4200
It is an hydraulic press (water at max 220 atm from the high pressure line) with a force of 4200 tons. It was maintained (changing columns, crossbar, bench, structure in general) many times and rev...
HYUNDAI 1500-1500*1200
Push Down Acting, Free Forging Hydraulic Press with Piercing and Sliding Table.
HYUNDAI PRECISION 1500TON
LAMBERTON
DAYLIGHT 1.350 mm, TABLE SIZE 1.100x1.300 mm
NOVOKRAMATORSK K8548
Hot forging press NKMZ ( Kramatorsk) K8548 Year: 1975 Nominal force: 6300 tons Number of continous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper positi...
SKODA CKV 6300
Manufacturer: Škoda Type: CKV 6300 Main dimensions – Distance between columns: 4 000 mm – Upper beam width: 2 900 mm – Clearance press height: 6 000 mm – Ram beam stroke: 2 500 mm – Total length: ...
SMERAL LZK 2500
SMERAL LZK 2500 Hot Forging press Year: 1978 Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): ...
WARCO 100-2-90C SSDC
Press was re-built in 2018 and never ran since then. Warco press was part of a federal machine. Both were bought out by bcn technical services . 100 ton capacity 15'' total stroke 20/23 spm sdav=2...
WATERBURY FARREL 1016 ICOP
Waterbury Farrel 1016 ICOP Eyelet Transfer Press W/3" Stroke & Arc-Trol Die Protection Make: Waterbury Farrel Model: 1016 ICOP Stroke: 3" Shut Height: 2.75 To Top Of Die Shoe Capable Of Drawin...
WEINGARTEN PSS300
STROKE 480 mm, STROKES 33-45 n°/min, SCREW 300 mm, TABLE SIZE 700x800 mm, SHUT HEIGHT 670 mm, ENGINE POWER 50 kW
