갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)SNK HF-6M
Niedersachsen, 독일개요
This Double column 5-face machining centre made by SNK Japan is in superb condition with less than 1500 run hours .
It is fitted with all the options to make 5-face machining easy and comfortable.
Tool changer and head changer with heads make machining in one setup possible.
This avoids delay, and loss of accuracy.
사양을 미터법으로 변환
X | 364.17" |
Y | 165.35" |
Z | 39.37" |
동력 | 49.6 hp |
분당 회전속도 | 3,000 RPM |
테이블-W | 118.11" |
테이블-L | 314.96" |
# ATC | 60 |
테이퍼 | BT50 |
치수 | 24900 x 9100 x 8400 |
제어반 | CNC (Fanuc 31-iB) |
장착
60 station tool magazine and automatic tool changer ATC.
Tool changing in Vertical & Horizontal spindles (heads).
5 station Head magazine and automatic head changer AAC.
Angle heads indexing 1° increments (standard is 4 x 90°).
Universal center swivel head indexing at 1°/1° increments in B-Plane and C-Plane. B 0-95°. C 0-359°
90° angle head L 700 mm.
90° angle head L 500 mm.
Universal center swivel head L 800 mm.
Vertical high speed head to 6000 rpm.
90° high speed angle head to 15000 rpm.
Special software for attachments (heads).
Chip conveyor.
Air blow.
X,Y,Z axes linear scale feedback for highest accuracies.
스펙 시트
Double Column Machining Centre for 5-Face Machining.
SNK Multi Center HF-6M.
Year 2016, installed 2017.
Fanuc 31i CNC.
Distance between the columns 3500 mm.
Table longitudinal travel X 9250 mm.
Spindle head cross travel Y 4200mm.
Ram vertical travelZ 1000 mm.
Crossrail vertical travel W 2200 mm.
Table top to spindle nose max. 3500 mm.
Table size 8000 x 3000 mm.
Table load 40000 kg (60000 kg evenly over the full table).
Spindle drive motor 37/45 KW.
Spindle speeds 30 - 3000 rpm.
Spindle torque max. 1954 Nm.
60 station tool magazine and automatic tool changer ATC.
Tool changing in Vertical & Horizontal spindles (heads).
5 station Head magazine and automatic head changer AAC.
Angle heads indexing 1° increments (standard is 4 x 90°).
Universal center swivel head indexing at 1°/1° increments in B-Plane and C-Plane. B 0-95°. C 0-359°
90° angle head L 700 mm.
90° angle head L 500 mm.
Universal center swivel head L 800 mm.
Vertical high speed head to 6000 rpm.
90° high speed angle head to 15000 rpm.
Special software for attachments (heads).
Chip conveyor.
Air blow.
X,Y,Z axes linear scale feedback for highest accuracies.
AS NEW CONDITION WITH LESS THAN 1500 Hours !
이 유형의 게시 목록 더 보기
VISION WIDE VB3016
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
VISION WIDE VF4000
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
QUICKMILL INTIMIDATOR 120
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
OKUMA MCV 21-41
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
이 브랜드에 대한 게시 목록 더 보기
SNK FSP-50V
수직형 머시닝 센터
SNK RB-6VM
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
SNK RB3-NSM
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
SNK PM-6
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)