수직형 머시닝 센터DYNAPATH DMC-845L
미국개요
DynaPath DMC mill centers feature an unique eight-station tool changer that enables batch production using standard 40-taper tooling. The X, Y, and Z axes ways use roller-type linear rails that offer a balance of high rigidity and speed, allowing a rapid speed of 20 m/min (780 IPM). The 8000 RPM belt-driven spindle is dual wound, offering improved torque characteristics in the low winding when operating at under 1800 RPM. For the operator, the versatile WinDelta control allows manual DRO, semi-automatic, and also fully automatic operation of the machine by running standard G-Code. Furthermore, Conversational Programming and DXF CAD capabilities enable the operator to program right at the machine.
사양을 미터법으로 변환
| X | 31.4" |
| Y | 15.7" |
| Z | 19.6" |
| 동력 | 7 hp |
| 분당 회전속도 | 8,000 RPM |
| 테이퍼 | BT40 / CAT40 |
| 테이블-W | 16.5" |
| 테이블-L | 33.5" |
| #축 | 0 |
| 치수 | 87" X 87" X 91" |
| 무게 | 8360 |
장착
Automatic 4 Way Tool Changer
CNC Rigid Tapping
C3 Class Precision Ball Screws
Auto Lubrication System
Full Enclosure
Flood Coolant System & Chip Recovery Tray
LED Work Light
Tri color Light Post
Tools and Toolbox
One Year Warranty on All Parts
OPTIONS:
Optional Spindle Probe and Automatic Tool Setter allow fast and accurate part setup.
MPG RUN feature allows easing into a part program by synchronizing machine feed motion with the turning of the electronic MPG handwheel.
Program RETRACE feature allows starting the part program at any specified block.
스펙 시트
MODEL DMC-845L
TYPE Mill Center
TRAVEL XYZ 800 x 400 x 500 mm
(31.4" x 15.7" x 19.6")
AXES TYPE X/Y/Z Linear Roller / Linear Roller / Linear Roller
SPINDLE NOSE TO TABLE 110 - 535 mm (4.3-21.0")
TOOL TO COLUMN 435 mm (17.1")
MOTORS X/Y/Z 0.85 / 0.85 / 1.35 kW Direct Drive
SPINDLE TAPER BT40 / CAT40
SPINDLE DIAMETER 127 mm (5.0")
SPINDLE RPM 50-8000 RPM
SPINDLE MOTOR 5.5 kW (7 HP) Belt Drive
SPINDLE RATED TORQUE 36 N-m (26.55 ft-lb")
TOOL CHANGER 8-Station Independent Arm
MAX TOOL SPEC Ø63 mm (Ø2.4") / 5 kg (11.0 lbs)
MAX RAPID SPEED X/Y/Z 20 m/min (787 IPM)
POSITIONING ACCURACY 12 um (0.000472")
REPEAT ACCURACY 6 um (0.000236")
TABLE SIZE 850 x 420 mm
(33.5" x 16.5")
TABLE SLOTS x OFFSET x WIDTH 4 x 85 mm x 18 mm
(4 x 3"11/32 x 45/64)
MAX TABLE LOAD 200 kgs (440 lbs)
MACHINE WEIGHT 3800 kg (8360 lbs)
SHIPPING L x W x H 2200 x 2000 x 2310 mm
(87" x 79" x 91")
MACHINE L x W x H 2200 x 2200 x 2310 mm
(87" x 87" x 91")
COOLANT CAPACITY 200 L (50 gal)
AIR REQUIREMENTS 6 kg/cm2 (90 psi)
POWER REQUIREMENTS 15 kVA, 3 Phase, 220V
