Magplastic SSB02 PET Bottle Blow Moulding Machine, 2008 – Previously used for 1.75L, 1L, and .75L PET bottles – System includes tote dumper, pre-form conveyor, and bottle blower Machine technical data: – Press closing force: 220 kN – Average electrical power with heating fully engaged: 37 kW (up to 66 kW with options). True electrical consumption depends on bottle shape, preform length and thickness. – Standard voltage / frequency: 3 x 400 to 480V equilibrated + E – 50Hz / 60Hz – Permissible fluctuations: +/- 5% – Distance between moulds: 118 mm Heating system: One pre-heating box: – 9 lamps x 1500W – Total power: 13,500 kW – Adjustable regulation 2/3 of nominal power (1000 to 1500W) One profiler heating box: – 9 lamps x 1500W – Total power: 13,5 kW – 9 independently regulated zones Air Supply – Blowing air, “oil-free” (40** bar) : 2800 bt/h x 1 litre = 150 Nm3/h / 2800 bt/h x 2 litre = 320 Nm3/h – Working air (7 to 10 bar): 65 Nm3/h – Pressure range: 27 to 40 bar Cooling water – Water chiller capacity: approx. 15’000 kcal/h – Water pressure range: 5 to 6 bar – Water temperature range: 6 to 10 ° C (42°F to 50°F) – Flow rate : 2.4 to 3.0 m3/h Bottle Production – Number of moulds : 2 – Production output : up to 2’800 bottled / hour depending on bottle size, shape and weight, altitude of production site