Brand: Elumatec Model: SBZ 122/64 Designed for economical and efficient machining of aluminum, PVC and thin-walled steel profiles, the Elumatec SBZ 122/64 is a machining center that can process 3 sides of a profile without moving the work piece. This is the perfect machine for automatic door manufacturing with a single or multiple locks or other industrial applications. With the extended bed length, the machine has the capability of machining one long part or machining a part that's up to 1/2 the bed length allowing for loading / unloading a part on the other side of the bed. All operations, such as routing, drilling and tapping, are performed while the profile bar is stationary to protect the profile surfaces Better machining results thanks to the intelligent control technology Fast positioning of the machining unit with up to 120 m/min thanks to dynamic servo drives Tapping without compensation chuck Automatic tool changer for an angle head State-of-the-art 3-axis controller Automatic clamp recognition and positioning prevents collisions Power torque routing motor with enclosed speed control for short spindle start-up and braking times. Machine configuration A material stop on the left Tool holder HSK-F63 Routing spindle with integrated rotation unit (0°, -90°, -180° and -270°) for angle head X-axis routing capacity face side up: 263.78" Y-axis routing capacity: 13.75" Routing capacity top: 9" Routing capacity front: 7" Table capacity Z-axis: 11" Routing capacity top: 11" Step over capacity: 7.3" Rapid positioning Y-Z axes: 196 FPM max. Rapid positioning X axis: 98 FPM max. Max spindle speed: 24,000 RPM Spindle power: 28 H.P. Max. profile height / Ste over max: 11" Max. diameter of tooling: 2.48" Max. diameter of disc cutter: 7.87" manual / 3.62" automatic Max. air pressure: 102 PSI Max. length of tooling: 5.90" Max. diameter shaft for ER-32 collet: .78" Max. diameter shaft for ER-16 collet (angle head cap collet): .511" Max. diameter shaft for 077 collet: .394" Tapping capacity: .0375" @65% thread Tool chuck: HSK F63 Tool holder for automatic tool change: 6 Weight: 7,500 Lbs. Equipped with: Right angle head Spindle cooling unit PC based control with Elucam software and handheld pendent control Pneumatic retractable material stop Air conditioned electrical enclosure Machining for 3 sides of profile Linear guides for X, Y, Z travel Profile is held by adjustable pneumatic clamps Automatic tool changer Pulse spray mist coolant Tool height gauge Light curtains