공구 및 커터 연마기CINCINNATI MILACRON MT
Ohio, 미국개요
모델
ID#
585121
조건
중고 - 우수
년도
1984
Serial #
4898A0184-0056
위치
Ohio
미국
미국
반환 정책
30-일
Stock #
Q11407
CINCINNATI MILACRON MONOSET TOOL & CUTTER GRINDER, Latest Model MT, 12" Swing, 6" Centers, 4" Grinding Wheel, 1/2 HP, Swivel Workhead, Low Hour Super Tight Machine with Tooling, New 1984.
사양을 미터법으로 변환
| 스윙 | 12" |
| 동력 | 0.5 hp |
| 연마 휠 직경 | 4" |
| 최대 RPM | 1,425 RPM |
| 치수 | 56" x 42" x 69" |
| 무게 | 1,800 LBS |
장착
IF Your Monoset is Worn Out, This is the One You Want- It's Tight.
The Model MT is the Best and Last Model Monoset Milacron Made.
- Hard Chrome Ways
- Precision Ball Screws in all Axes
- Swivel Table
- Hand Wheels on Left and Right
- Bijur One Shot Oil Lube System
- Adjustable Workhead Tooth Rest
- (2) CB Grinding Wheels and Wheel Mounts
- (2) Standard Grinding Wheels and Wheel Mounts
- Index Plate with 12 Divisions
- Grinding Wheel Mount Mandrel
- Collet Holder for Workhead with One 1/2" Super Flex A Collet
- Full Set of Calibrated Double Adjustable Vernier Dogs
- Adjustable Worklight
- Grinding Wheel Mandrel
- Recent New Wheelhead Motor
- Grinding Dust Exhaust Hood
- Wheel Guard
스펙 시트
Max Workhead Swing Over Main Slide................... 12"
Max Workhead Collet Hole............................. 1.25"
Min Workhead Collet Hole............................. 0.12"
Min Lead Generated by Spiral Lead Mechanism.......... 1.81"
Length Between Spindle Nose and Tailstock Center..... 6"
Max Grinding Wheel Diameter.......................... 4"
Workhead Main Slide Travel........................... 5.75" L-R
Workhead Offset Slide Travel......................... 5.25" F-B
Workhead Front of Center Slide Travel................ 3"
Workhead Rear of Center of Slide Travel.............. 2.25°
Workhead Turntable Swivel............................ 235°
Workhead Above & Below Center........................ ± 40°
Wheelhead Longitudinal Slide Travel.................. 6"
Wheelhead Vertical Slide Travel...................... 9.5"
Wheelhead Cross Slide Travel......................... 7.5"
Wheelhead Spindle Speeds............................. 4,000 | 5,729 | 8,000 RPM
Wheelhead Drive Horsepower........................... 1/2 HP
Workhead Spindle Speeds.............................. 1,425 RPM
Electrics............................................ 460/3/60
Approximate Machine Dimensions....................... 56" x 42"
Approximate Machine Height........................... 69"
Approximate Machine Weight........................... 1,800 LBS
CONDITION: This Machine Appears to be in Excellent Condition !
이 유형의 게시 목록 더 보기
CINCINNATI GRINDERS INC #2
공구 및 커터 연마기
BROWN & SHARPE 13
공구 및 커터 연마기
CINCINNATI MILACRON MONOSET
공구 및 커터 연마기
CINCINNATI GRINDERS INC #2
공구 및 커터 연마기
이 브랜드에 대한 게시 목록 더 보기
CINCINNATI MILACRON R-78
평면 및 앵글 헤드를 포함한 원통형 연마기
