스위스 타입 자동 스크류 기계류TSUGAMI BU26SY
Ohio, 미국개요
브랜드
모델
ID#
582344
조건
중고 - 우수
년도
2006
Serial #
126
위치
Ohio
미국
미국
반환 정책
30-일
Stock #
1721
This is a great 8 axis machine that is right for anyone.
사양을 미터법으로 변환
스핀들 구멍 직경 | 1.0236" |
분당 회전속도 | 5,000 RPM |
동력 | 7.3 hp |
#축 | 8 |
치수 | 133" x 83" x 101" |
무게 | 12,100 |
제어반 | CNC (FANUC 18iTA) |
장착
Equipped With
Fanuc 18iTB2 CNC Control
Full C Axis Control on Main Spindle
C Axis Indexing on Sub Spindle (5 Degree Resolution)
Chip Blaster J4BW1SS 5-Channel High Pressure Coolant System (M Code Controlled)
LNS Hydrobar Express 332 Bar Loader
Collets and Guide Bushings Included
Side Discharge Chip Conveyor
Machine Leveling Pads.
All Available Books & Manuals.
Total Machine & Options
Estimated Tool Holders Included:
8 Station Interchangeable Tool Holders
QTY 1 - 3233-H040 - 4 Tool Turning Holder
QTY 2 - 3233-Y340 - Double Cross Drilling Head ER16
QTY 1 - 3233-Y360 - Powered Cross Drill ER25
QTY 2 - 3233-H060 - Double Axial Drilling Holder
QTY 1 - 3231-H010 – Single Axial Drill Holder
(2) 29mm Channel Sets for 1” Cap.
All Push Rods, Push Rod Channels, Flags, Collet Bearings, Collets.
Collet Set 1”, 15/16”, 7/8”, 13/16”, 25/32”
17MM Channel Set All Push Rods & Channels, Collet Bearings
스펙 시트
Specifications
Capacity: 1"
Power: 7.3 hp
RPM: 5,000 RPM
# Axis: 8
Swiss, Chucker or Convertible?: Swiss
Main Spindle Indexing: Full C
Sub Spindle Indexing: 5 degree
Live Back Working Tools?: Yes
B-Axis?: No
Control: CNC (FANUC 18ITB2)
Dimensions: 133" x 83" x 101"
Weight: 12,100 lbs
To the best of our knowledge all details listed below are deemed correct.
General Specifications:
Main Spindle
Bar Capacity: 1.000"
Turning Lengths: 9.842 " per Stroke
Indexing Increments: Full C-Axis (.001 deg)
Speeds: 6000 RPM
Sub-Spindle
Bar Capacity: 1.000 "
Speed: 200 - 5000
Drive Motor: 7.3 hp
Index Increment (Degrees): 5° Indexing (C Optional)
Axis Specifications
STD. Number of Axes: 8
Axis/ Travel/ Traverse rate/ Feed rate
X1 (STD.) 1.378 Inch 472 IPM 236 IPM
Z1 (STD.) 9.842 Inch 944 IPM 236 IPM
C1 (STD.) 360.000 Deg.
Y1 (STD.) 9.448 472 IPM 236 IPM
X2 (STD.) 4.330 Inch 472 IPM 236 IPM
Z2 (STD.) 5.511 Inch 944 IPM 236 IPM
Y2 (STD.) 3.149 Inch 393 IPM 236 IPM
Z3 (OPT.) 11.220 Inch 944 IPM 236 IPM
Live Tool Speed: 5000 RPM
Live Tool Motor: (HP): 15.0
Type/ Gang-Slide/ Turret
-Max. number of tools
Turning 7 8
Rotary 2 4
Square 0.500 "
Round 0.750 " 1.000 "
Rotary 0.250 " 0.500 "
Rotary tooling
Horse power .7 1.9
Speed 8000 rpm 5400 rpm
There are a number of tools offered that allow for 2 - 4 tools on one holder
On-Center Mill Drill Standard with 'C' Axis
Off-Center Mill Drill Standard with 'Y' Axis
Floor layout: Length: 137 " x Width: 80 " x Height: 69 "
The Tsugami BU26Y (1" capacity) is a benchmark that sets the rules for power, rigidity, and longevity; it is the future of the Swiss-type machine technology.
* Now, taking advantage of new control technology with Fanuc 18iT control, increased power and drives it's more efficient than ever.
* A wide assortment of driven tools for the rear turret driven tool stations is available, also included are driven cross tools on the front slide, making this the most flexible of models.
* An 8-station turret (3-axis), plus an independent gang tool slide with driven tools permits many simultaneous functions. Balanced turning, balanced threading, simultaneous front and back working.
* Standard are a 15hp main spindle, 7.5hp sub-spindle with through feed capability, 8-axis including x1,x2,z1,z2,z3, and y. Excellent for complex machining.
Machine: 133" x 83" x 101" 12,100 lbs
Coolant/Chip Pan: 80" x 62" x 23" 250 lbs
이 모델의 목록보기
TSUGAMI BU26SY
스위스 타입 자동 스크류 기계류
이 유형의 게시 목록 더 보기
CITIZEN M32VIII
스위스 타입 자동 스크류 기계류
STAR ST-38
스위스 타입 자동 스크류 기계류
STAR SR-20RIV/B
스위스 타입 자동 스크류 기계류
STAR SW-20
스위스 타입 자동 스크류 기계류