수직 보링 밀 (VTL 포함)BULLARD 54 SPIRAL DRIVE
미국개요
브랜드
ID#
565528
조건
중고 - 양호
년도
1943
Serial #
21310
위치
미국
Stock #
B600634
54" Used Bullard Vertical Turret Lathe
사양을 미터법으로 변환
테이블 직경 | 50" |
스윙 | 56" |
작업 높이-레일 하단 | 35.5" |
동력 | 25 hp |
분당 회전속도 | 60 RPM |
치수 | R-L 120" X F-B 9'6" X 120" High |
무게 | 24,000 Lbs. |
스펙 시트
Table Size....................................................50" 4 Jaw
Swing Side Head Above Table...................................56"
Swing Side Head Below Table...................................58"
Height Under Rail.............................................35-1/2"
Table Speed...................................................3.5 To 60 Rpm's
Floor To Table Height.........................................34-/2"
Feeds.........................................................002 To .500 I.P.R.
Turret Head Travel Left To Right..............................34-1/2"
Turret Ram Head Turret Travel Up & Down.......................30"
Turret Head Position..........................................5
Side Head Travel In & Out.....................................27"
Side Head Travel Up & Down....................................25"
Main Motor....................................................25 Hp.Wired 240 Volts
Machine Floor Space...........................................R-L 10' X F-B 9'6"
Machine Height................................................10'
Machine Weight................................................25,000 Lbs.
Turret Head Swivel............................................Yes
Side Head.....................................................Yes
Machine Machine needs a small pit in the floor for the
bearing nut housing...........................................18"X 18" X 6" Height
Note:
Turret & side head gear boxes will be reconditioned.
Spindle & transmission will be checked.
Oil will be drained and tanks will be cleaned.
Side will be removed and check and cleaned.
Chuck jaws will be removed and taken apart and cleaned.
New electric motors and gear boxes for turret rapid traverse left to right
and up and down.
New electric motor for rail elevation and gear box complete with electrics.
New electrics with exception of main breaker.
New cross feed nut and screw.
New bearing in main motor.
New belts
Machine will be cleaned, painted and cycled.
Machine will take 14 to 16 weeks to complete, once the PO is received.
이 모델의 목록보기
BULLARD 54 SPIRAL DRIVE
수직 보링 밀 (VTL 포함)
BULLARD 54 SPIRAL DRIVE
수직 보링 밀 (VTL 포함)
이 유형의 게시 목록 더 보기
MOTCH 135
수직 보링 밀 (VTL 포함)
HONOR VL-160CM
수직 보링 밀 (VTL 포함)
HONOR VL-125C
수직 보링 밀 (VTL 포함)
FARREL N/A
수직 보링 밀 (VTL 포함)
이 브랜드에 대한 게시 목록 더 보기
BULLARD DYN-AU-TAPE
수직 보링 밀 (VTL 포함)
BULLARD DYN-AU-TAPE
수직 보링 밀 (VTL 포함)
BULLARD DYN-AU-TAPE 46
수직 보링 밀 (VTL 포함)
BULLARD CUTMASTER 36
수직 보링 밀 (VTL 포함)