금속 편 청소기MAC-TECH SLAT BOSS
Wisconsin, 미국개요
THE SLAT BOSS BY MAC-TECH IS DESIGNED FOR USE ON FLATBED LASER
MACHINES TABLES, SUPPORTING SLATS FROM 2.5 TO 4 MM (0.10 – 0.157”)
THICK. WITH AUTOMATIC FORWARD FEED, THIS MACHINE CLEANS SLAG UP
TO 1.24” THICK OFF STEEL, STAINLESS STEEL, AND COPPER SUPPORT SLATS,
OPERATING AT SPEED OF 1600 R/MINUTE. YOU DO NOT NEED TO REMOVE
SLATS TO USE OUR LASER BED SLAT CLEANER
LASER TABLES (SLATS) QUICKLY BUILD UP SLAG AND
DROSS. INSTEAD OF LIVING WITH THAT BUILD-UP,
ALLOWING YOUR FINISHED SURFACES TO SCRATCH
OR EVEN REPLACING THE SLATS, THE BOSS WANTS
TO SEE YOU! THE SLAT BOSS BY MAC-TECH IS AN
INDUSTRIAL-GRADELASER BED SLAT CLEANER.
| 치수 | 59 inch - L |
| 무게 | 55 LBS |
스펙 시트
POWER: 230 V – 3 PHASE – 2 AMP (OPTIONAL 230/460 3PH DUAL VOLTAGE)
WEIGHT: 55 POUNDS
LENGTH: 59 INCHES
SLAT THICKNESS - STANDARD SLAT.118” (CAN BE ORDERED FOR .090” & .157”)
MIN SPACING BETWEEN SLATS MIN: 1.22 (31MM), BREAKER SELECTION – FOR 2.3MM,
3MM, 4MM
WORKING SPEED 236 IPM – 314 IPM (6-8M/MIN)
SLAT CLEANING CAN BE PERFORMED ON UNUSED BED DURING MACHINE OPERATION.
• TIME FOR CLEANING A STANDARD TABLE(WEEKLY): 11 MINUTES.
• CAN BE USED ON VARIOUS LASERS FROM DIFFERENT MANUFACTURERS.
• DUAL CUTTERS LIFT SLAG FROM BOTH SIDES OF THE SLATS ON A SINGLE PASS.
• SLAT THICKNESS SPECIFIED ON ORDER (STANDARD IS .118” / 3MM). CHANGING THE CUTTERS
ACCOMMODATES DIFFERENT SLAT THICKNESSES
O .090”/2.3MM, .118”/3MM, AND .157”/4MM SLATS (CHOOSE ONE)
• SIMPLE TO START AND STOP: MAY BE TURNED ON OR OFF AT MOTOR BOX OR END OF
HANDLE.
• RESETTABLE OVER-CURRENT PROTECTION STANDARD.
• MOBILE TROLLEY – OUR DEVICE HAS A MOBILE TROLLEY FOR EASY TRANSPORT.
• STORES UPRIGHT AND DOWN POSITION - STORES BOTH WAYS + TROLLEY ALSO USED AS A
CAGE WHEN NOT IN USE
