터렛 선반 (램 & 새들)WARNER & SWASEY 4A M-3550 LOT 39
미국개요
모델
4A M-3550 LOT 39
ID#
529316
조건
중고 - 양호
년도
1964
Serial #
2056722
위치
미국
Stock #
L630460
4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
사양을 미터법으로 변환
Model | 4A M-3550 |
스윙 | 28.25" |
Center Distance | 62 in |
형식 | Saddle |
치수 | 20' Long. X 84" Wide X 84" High |
무게 | 24,000 Lbs. |
장착
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 24"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $119,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO and deposit are received.
Estimated time frame eight weeks
스펙 시트
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Spindle Hole 9-1/4"
Center Distance 62"
Spindle Speeds 20 To 526 Rpm's
Spindle Nose A-15
Chuck Size 24" 4-Jaw New Gator
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor 75 / 37.5 Hp.
Floor Space Right To Left 20'
Floor Space Front To Back 7'
Machine Height 80"
Weight 24,000 Lbs.
Flange Holders 4
Slide Tool (1) Yes
Tool Post 4 Way On Front Yes
Fixed Rear Turret Yes
Full Chip Pan And Coolant Yes
Coolant Yes
Note: Machine has been cleaned, painted and cycled. Good working condition.
Front Ways does have some scoring.
이 유형의 게시 목록 더 보기
GISHOLT 4L
터렛 선반 (램 & 새들)
GISHOLT 5L
터렛 선반 (램 & 새들)
WARNER & SWASEY 4A M-3550
터렛 선반 (램 & 새들)
WARNER & SWASEY M-3580
터렛 선반 (램 & 새들)
이 브랜드에 대한 게시 목록 더 보기
WARNER & SWASEY LU4
범용 원통형 연마기
WARNER & SWASEY LCV5
평면 및 앵글 헤드를 포함한 원통형 연마기
WARNER & SWASEY C5
평면 및 앵글 헤드를 포함한 원통형 연마기
WARNER & SWASEY
평면 및 앵글 헤드를 포함한 원통형 연마기