갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)AWEA LP-4025
California, 미국개요
사양을 미터법으로 변환
X | 158" |
Y | 98.6" |
Z | 30.9" |
동력 | 35 hp |
분당 회전속도 | 6,000 RPM |
# ATC | 40 |
테이퍼 | 50 |
테이블-W | 94.4" |
테이블-L | 164.6" |
치수 | 34’6" X 17’6" x 130" High |
무게 | 87600 lbs |
스펙 시트
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
Equipped With:
Fanuc 18iMB CNC Control
Cutting Time 21,108 Hours
158″ X 98″ Table
40 Station Side Mount Tool Changer
50 Taper Geared Head
6000 RPM Spindle
Coolant Thru Spindle
Powerful 35 HP high torque spindle motor
PCMCIA Card Slot
RS-252 Port
Spindle Orientation
Box Way Construction
Portable manual pulse generator
Flood coolant with large separate coolant tank Base
Flush Chip Disposal with Dual Auger
Chip Conveyor
Chiller Unit
Levelling Pads
Replacement Cost over $500,000.00
Note: Machine is dismantled and Ready to be loaded on the Truck
Travels:
X-Axis: 158.0″
Y-Axis: 98.6″
Z-Axis: 30.9″
Distance Between Columns: 106.2″
Spindle Nose to Table (Min.- Max.): 8.6″- 39.57″
Feed rates: Rapid X,Y & Z: 590 inch per minute
Cutting Feedrate: .04″ – 376″ inch per minute
Table:
Length: 164.6″
Width: 94.4″
T-Slot: 0.87″ Wide X 20 X 7.87″
Max Weight on Table: 33,000 lbs
Spindle:
Taper Size: 50
Speed Range: 6000 RPM
Spindle Power: 35 HP
Automatic Arm Type Tool Changer:
50 Taper
Capacity: 40
Max Tool Weight: 43 lbs
Max Tool Length: 13.77″
Max Tool Dia.: 5.2 – 7.7″
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 3-Phase, 70 Kva
Floor Dimensions: 34’6″ X 17’6″ x 130″ High
with Hydraulic Unit, Chip Conveyor, Chiller unit
Weight: 87,600 lbs.
이 모델의 목록보기
AWEA LP-4025
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
이 유형의 게시 목록 더 보기
VISION WIDE VB3016
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
VISION WIDE VF4000
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
QUICKMILL INTIMIDATOR 120
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)
OKUMA MCV 21-41
갠트리 머시닝 센터 (브리지 및 더블 컬럼 포함)