엔진 선반SIDNEY 16
Texas, 미국개요
18" X 72" Used Sidney Engine Lathe Ref.#L3000192
Model: 16
Serial No. 9129
New: 1954
Swing Over Bed Ways....18-1/2"
Swing Over Cross Slide....10"
Center Distance....78"
Spindle Hole....11-1/2"
Spindle Speeds....13 To 1,000 Rpm's
Spindle Nose....D1-6
Chuck Size....16" 4 Jaw
Feeds.....0075 To 240
Threads Inch....1-1/2 To 90 TPI
Tail Stock Quill Diameter....4-1/2"
Tail Stock Quill Travel....10"
Tail Stock Taper....#4 Morse
Main Motor....10 Hp. 220 / 440
Floor Space Length & Width....134" X 72"
Height....66"
Weight....7,500 Lbs.
Coolant Pans....Yes
Taper Attachment....Yes
Thread Dial....Yes
Note: Machine Will Be Cleaned, Painted & Cycled.
사양을 미터법으로 변환
| 스윙 | 18" |
| 중심 | 78" |
| 스핀들 보어 | 2.25" |
| 동력 | 10 hp |
| 분당 회전속도 | 1,000 RPM |
| 슬라이드 위 스윙 | 11" |
| 치수 | 72" W X 134" L X 66" H |
| 무게 | 7,500 |
스펙 시트
18" X 72" Used Sidney Engine Lathe Ref.#L3000192
Model: 16
Serial No. 9129
New: 1954
Swing Over Bed Ways....18-1/2"
Swing Over Cross Slide....10"
Center Distance....78"
Spindle Hole....11-1/2"
Spindle Speeds....13 To 1,000 Rpm's
Spindle Nose....D1-6
Chuck Size....16" 4 Jaw
Feeds.....0075 To 240
Threads Inch....1-1/2 To 90 TPI
Tail Stock Quill Diameter....4-1/2"
Tail Stock Quill Travel....10"
Tail Stock Taper....#4 Morse
Main Motor....10 Hp. 220 / 440
Floor Space Length & Width....134" X 72"
Height....66"
Weight....7,500 Lbs.
Coolant Pans....Yes
Taper Attachment....Yes
Thread Dial....Yes
Note: Machine Will Be Cleaned, Painted & Cycled.
Condition Very Good
이 모델의 목록보기
이 유형의 게시 목록 더 보기
SHARP W1840
엔진 선반
WAGNER BNK 710
엔진 선반
이 브랜드에 대한 게시 목록 더 보기
SIDNEY TYPE H.D.
엔진 선반
SIDNEY
엔진 선반
