전체에서 Displaying 모델 1 - 50 of 54
thumb

LNS ALPHA 538

The Alpha 538 - efficient and cost effective bar feeder The maximum productivity for feeding bars with diameters of 5 to 38 mm is ensured by this LNS Alpha 538 bar feeder. Therefore, it is especial...

바 피더
1 사진
Brochure
thumb

LNS ALPHA 552

The Alpha 552 - efficient and cost effective bar feeder The LNS Alpha 552 bar feeder ensures the maximum productivity for feeding bars with diameters of 5 to 52 mm. Therfore, it is especially suite...

바 피더
1 사진
Brochure
thumb

LNS ALPHA SL 65S

Automatic Magazine Bar Loader For Spindle Length Bar Stock on Fixed Headstock Lathes Capacity: 1/4” through 2-5/8” * not to exceed overall length of spindle Bar Length Capacity: 12" to 61"* (*) Ma...

바 로더 (매거진 타입)
1 사진
비디오
Brochure
thumb

LNS ALPHA ST212

Automatic Magazine Bar Loader for sliding headstock lathes to run: Capacity: .078” to .470” (2 mm to 12 mm) diameter x 12’ 6” bar length

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS Alpha ST320

Automatic Magazine Bar Loader for sliding headstock lathes to run capacities: Capacity: 1/8” to .787” (3 mm to 20 mm, 25 mm with bar preparation) diameter x 12’ 6” bar length

바 로더 (매거진 타입)
1 사진
비디오
Brochure
thumb

LNS BLAZE AIR

Vacuum Parts Loader/Unloader 2 Models available: Blaze Air-U: Designed to automatically unload parts from twin spindle machines or lathes equipped with a through hole sub-spindle. Blaze Air-LU: Des...

싫고 내리는 시스템
1 사진
Brochure
thumb

LNS EXPRESS 220

Automatic Magazine Bar Feed for 12' bar stock used with sliding or fixed headstock turning machines For bar stock from .079” to .787” (2 mm to 20 mm), 1.02” (26 mm) maximum with bar preparation

바 로더 (매거진 타입)
1 사진
비디오
Brochure
thumb

LNS EXPRESS 220 S2

Loading 2 mm to 4 mm diameter bars, can be difficult for many bar feeders. However, not for the Express 220 S2 automatic bar feeder. It reliably loads small diameter bar stock using exclusive loadi...

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS Express 332

Automatic Magazine Bar Loader for Swiss style or fixed headstock lathes to run 12’ bars in diameters of 1/8” to 1-1/4” 2 Models available: 6’ or 12’ ** Capacity: 1/8” to 1-1/4”

바 로더 (매거진 타입)
1 사진
비디오
Brochure
thumb

LNS EXPRESS 332 S2

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS FOX HE 1000

The Fox HE 1000 electrostatic oil mist collector is specifically designed for machine tools to eliminate mist, smoke and odors from wet machining operations using straight oil. It is characterized ...

미스트 콜렉터
1 사진
thumb

LNS FOX SC2 330

미스트 콜렉터
1 사진
Brochure
thumb

LNS FOX WM2 2500

The LNS Fox WM2 series Oil/Coolant Mist Collector is specifically designed for machine tools that enclose more than 400 ft3. Additionally, these units can handle the grouping together of machines l...

미스트 콜렉터
1 사진
Brochure
thumb

LNS FOX WM2 5000

The LNS Fox WM2 series Oil/Coolant Mist Collector is specifically designed for machine tools that enclose more than 400 ft3. Additionally, these units can handle the grouping together of machines l...

미스트 콜렉터
1 사진
thumb

LNS FOX WS2 1020

LNS FOX WS2 oil / coolant mist collector series is the perfect solution for the elimination of oil/coolant mist and smoke typical in metal cutting applications. It ensures a clean, safe work enviro...

미스트 콜렉터
1 사진
Brochure
thumb

LNS FOX WS2 1250

LNS FOX WS2 oil / coolant mist collector series is the perfect solution for the elimination of oil/coolant mist and smoke typical in metal cutting applications. It ensures a clean, safe work enviro...

미스트 콜렉터
1 사진
Brochure
thumb

LNS FOX WS2 700

LNS FOX WS2 oil / coolant mist collector series is the perfect solution for the elimination of oil/coolant mist and smoke typical in metal cutting applications. It ensures a clean, safe work enviro...

미스트 콜렉터
1 사진
Brochure
thumb

LNS GT 112-E

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS GT 326-E

Automatic Magazine Bar Loader for sliding headstock lathes to run capacities listed below. Bar diameter capacity: 1/8” to .787” (3 mm to 20 mm) 1.02” max. (26 mm) with bar preparation Bar length: ...

바 피더
1 사진
비디오
Brochure
thumb

LNS HYDROBAR

Manual Load Bar Feed for sliding or fixed headstock lathes 8 models available ranging in bar capacities from 1/16" to 2-5/8"

바 피더
1 사진
thumb

LNS HYDROBAR SPRINT S3

Automatic Magazine Bar Loader for Fixed headstock Lathes Capacity: 1/2” to 3-1/8” Bar length capacity: 12 foot 6 inches

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS PB-80

The bar chamfering machine PB 80 is the ideal partner for automatic and manual bar feeders. The PB 80 offers an economical solution for bar end preparation. The PB 80 can be used as a chamfering ma...

면취기
1 사진
thumb

LNS PHASEP COALESCOR

Tramp Oil Removal System Unlike competitive belt and wheel skimmers, the PhaSep draws coolant into the coalescing box at a minimum rate of 1,000 gallons per day. Frequent tank volume turnover guara...

절삭유 필터링시스템
1 사진
비디오
Brochure
thumb

LNS QUICK LOAD SERVO 80 S2

Automatic Magazine Loader Used with fixed or traveling headstock lathes Capacity: Bar Diameter: ¼” to 3-1/8” Bar Length: 14” to 63” * *Not to exceed overall length of spindle

바 피더
1 사진
비디오
Brochure
thumb

LNS QUICK LOAD SERVO S3

Automatic Magazine Loader For Spindle Length Bar stock on Fixed headstock Lathes Capacity: Bar Diameter: 1/4” to 4-3/4” * Bar Length: 5” to 63” ** *Not to exceed overall length of spindle

바 로더 (매거진 타입)
1 사진
비디오
Brochure
thumb

LNS QUICK LOAD SERVO S3+

The Quick Load Servo S3+ bar feeder reliably loads 1/4” to 4-3/4” diameter bar stock in lengths from 4” to 63” (not to exceed overall spindle length). Coupled with a fully automatic diameter adjust...

바 피더
1 사진
Brochure
thumb

LNS QUICK SIX

Six Foot Automatic Bar Feed for Fixed Headstock Lathes Capacity: 3/8” to 3-1/8” * Length: 6’ Foot Bar stock

바 로더 (매거진 타입)
1 사진
비디오
Brochure
thumb

LNS QUICK SIX S2+

바 로더 (매거진 타입)
1 사진
thumb

LNS QUICKLOAD SERVO 80 S2

바 로더 (매거진 타입)
1 사진
thumb

LNS Sprint 565

Automatic Magazine Bar Loader for fixed or sliding headstock turning machines Bar Diameter: 1/4” to 2-1/2” (5 mm – 65 mm) Bar Length: 12’ 6”

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS SPRINT 565 S2

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS SPRINT S3

The Sprint S3 is an automatic magazine bar feeder designed to safely handle a complete range for small, medium and large diameter permitting large production runs. The Sprint S3 robust design and t...

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS STEADY REST

We’ve combined the industry’s best-selling automatic steady rest with LNS America’s unparalleled application experience and mounting design capability. The result is an exceptional value in a compl...

방진구
1 사진
비디오
Brochure
thumb

LNS TRYTON

Automatic Magazine Bar Loader 4 Models of Standard Barrel interchangeable barrels with up to 45 totally enclosed guide tubes provide hours of uninterrupted operation 2 Models of Combo Barrel 28 (2...

바 피더
1 사진
Brochure
thumb

LNS TRYTON 112

바 로더 (매거진 타입)
1 사진
Brochure
thumb

LNS TURBO 3D CHIP CONVEYOR

Central Processing Chip Conveyor for metal chips, fines and other materials

칩 처리 시스템
1 사진
Brochure
thumb

LNS TURBO HB

컨베이어
1 사진
Brochure
thumb

LNS TURBO MAGNETIC

Non Filtering Chip Conveyor Designed for maximum up time, dramatically longer life and reduced operating costs. Your best choice for cast iron and fine ferrous chips.

칩 처리 시스템
1 사진
Brochure
thumb

LNS TURBO MF2 CHIP CONVEYOR

The most versatile filtering chip conveyor down to 50 microns Heavy chip removal combined with fine coolant filtration. Your best choice for mixed materials, coarse or stringy chips, all sizes mi...

칩 처리 시스템
1 사진
Brochure
thumb

LNS TURBO MF3 CHIP CONVEYOR

Designed for maximum up time, dramatically longer life and reduced operating costs. Your best choice for mixed materials, coarse or stringy chips, all sizes mixed and aluminum, fine chips, coarse ...

칩 처리 시스템
1 사진
Brochure