ガントリマシニングセンタ(INCLD。ブリッジ&ダブルコラム)SNK HF-6M
Niedersachsen, ドイツ概要
ブランド
モデル
ID
611074
条件
使用 - 優れました
年
2017
場所
Niedersachsen
ドイツ
ドイツ
在庫No.
MV-6385
This Double column 5-face machining centre made by SNK Japan is in superb condition with less than 1500 run hours .
It is fitted with all the options to make 5-face machining easy and comfortable.
Tool changer and head changer with heads make machining in one setup possible.
This avoids delay, and loss of accuracy.
メトリックに仕様を変換します
X | 364.17" |
Y | 165.35" |
Z | 39.37" |
パワー | 49.6 hp |
回転数 | 3,000 RPM |
表A-W | 118.11" |
表A-L | 314.96" |
#ATC | 60 |
テーパー | BT50 |
大きさ | 24900 x 9100 x 8400 |
管理 | CNC (Fanuc 31-iB) |
装備
60 station tool magazine and automatic tool changer ATC.
Tool changing in Vertical & Horizontal spindles (heads).
5 station Head magazine and automatic head changer AAC.
Angle heads indexing 1° increments (standard is 4 x 90°).
Universal center swivel head indexing at 1°/1° increments in B-Plane and C-Plane. B 0-95°. C 0-359°
90° angle head L 700 mm.
90° angle head L 500 mm.
Universal center swivel head L 800 mm.
Vertical high speed head to 6000 rpm.
90° high speed angle head to 15000 rpm.
Special software for attachments (heads).
Chip conveyor.
Air blow.
X,Y,Z axes linear scale feedback for highest accuracies.
スペックシート
Double Column Machining Centre for 5-Face Machining.
SNK Multi Center HF-6M.
Year 2016, installed 2017.
Fanuc 31i CNC.
Distance between the columns 3500 mm.
Table longitudinal travel X 9250 mm.
Spindle head cross travel Y 4200mm.
Ram vertical travelZ 1000 mm.
Crossrail vertical travel W 2200 mm.
Table top to spindle nose max. 3500 mm.
Table size 8000 x 3000 mm.
Table load 40000 kg (60000 kg evenly over the full table).
Spindle drive motor 37/45 KW.
Spindle speeds 30 - 3000 rpm.
Spindle torque max. 1954 Nm.
60 station tool magazine and automatic tool changer ATC.
Tool changing in Vertical & Horizontal spindles (heads).
5 station Head magazine and automatic head changer AAC.
Angle heads indexing 1° increments (standard is 4 x 90°).
Universal center swivel head indexing at 1°/1° increments in B-Plane and C-Plane. B 0-95°. C 0-359°
90° angle head L 700 mm.
90° angle head L 500 mm.
Universal center swivel head L 800 mm.
Vertical high speed head to 6000 rpm.
90° high speed angle head to 15000 rpm.
Special software for attachments (heads).
Chip conveyor.
Air blow.
X,Y,Z axes linear scale feedback for highest accuracies.
AS NEW CONDITION WITH LESS THAN 1500 Hours !
このモデルのより多くのリストを参照してください。
このタイプのリストを参照してください
VISION WIDE VB3016
ガントリマシニングセンタ(INCLD。ブリッジ&ダブルコラム)
VISION WIDE VF4000
ガントリマシニングセンタ(INCLD。ブリッジ&ダブルコラム)
QUICKMILL INTIMIDATOR 120
ガントリマシニングセンタ(INCLD。ブリッジ&ダブルコラム)
OKUMA MCV 21-41
ガントリマシニングセンタ(INCLD。ブリッジ&ダブルコラム)
このブランドのためのより多くのリストを参照してください
SNK FSP-50V
立型マシニングセンタ
SNK RB-6VM
ガントリマシニングセンタ(INCLD。ブリッジ&ダブルコラム)
SNK RB3-NSM
ガントリマシニングセンタ(INCLD。ブリッジ&ダブルコラム)
SNK PM-6
ガントリマシニングセンタ(INCLD。ブリッジ&ダブルコラム)