CNC旋盤ROMI C-420
アメリカ合衆国概要
Romi C-420 Combination Manual & CNC Lathe, Royal Collet , Hand wheels, Conversational control, 4,000 RPM, 10 HP
メトリックに仕様を変換します
| スイング | 16.92" |
| センター | 43.46" |
| スピンドル ボア | 2.08" |
| パワー | 10 hp |
| 回転数 | 4,000 RPM |
| スイング オーバー クロス スライド | 7.87" |
| 大きさ | 122" x 50 |
| 重量 | 5,500 Lbs |
装備
- SIEMENS 802D CONTROL w/MANUAL GUIDANCE SOFTWARE, TOOL
PATH& 3D PART SHAPE GRAPHICS, TEACH MODE, CONVERSATIONAL
PROGRAMMING, G CODE PROGRAMMING, BUILT-IN DRO
- 10 HP VARIABLE SPEED SPINDLE DRIVE
- TURN PARTS MANUALLY OR AUTOMATICALLY
- DUAL ELECTRONIC HANDWHEEL CONTROLS
- "TEACH" 1ST PART, RUN REMAINING PARTS AUTOMATICALLY
- USB PORT<, FLASH MEMORY CARD SLOT & RS 232 PORT
- 10.4" COLOR LCD DISPLAY
- AIR ACTUATED 5C COLLET CLOSER
- RIGID TAPPING
- CONSTANT SURFACE SPEED
- INCH/METRIC CONVERSION
- MULTI-START THREADING, THREAD REPAIR
- FOURWAY TURRET TOOLPOST
- BORING BAR HOLDER
- COOLANT SYSTEM
- AUTOMATIC LUBRICATION SYSTEM
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
スペックシート
DISTANCE BETWEEN CENTERS..................... 43.46"
SWING OVER BED............................... 16.92"
SWING OVER CROSS SLIDE....................... 7.87"
CROSS SLIDE (X) TRAVEL....................... 8.66"
BED WIDTH.................................... 12.00"
BED HEIGHT................................... 13.77"
SPINDLE NOSE................................. A2-5 ASA
HOLE THROUGH SPINDLE......................... 2.08"
RANGE OF SPINDLE SPEEDS (INF VARIABLE)....... 4 - 4000 RPM
RAPID TRAVERSE (Z)........................... 393.70 IPM
RAPID TRAVERSE (X)........................... 393.70 IPM
TAILSOCK QUILL TRAVEL........................ 4.72"
QUILL DIAMETER............................... 2.36"
QUILL TAPER HOLE............................. 4MT
MAIN MOTOR................................... 10 HP
APPROXIMATE FLOOR SPACE ..................... 122" x 50"
APPROXIMATE WEIGHT .......................... 5,500 LBS
