5軸以上のCNC旋盤DMG MORI NTX 2500/1500
Illinois, アメリカ合衆国概要
DMG MORI NTX 2500/1500 CNC 5-AXIS MILL/TURN CENTER, NEW 2019
FANUC 31iB5 WITH CELOS & MAPPS
HIGH ACCURACY CONTROL
EXCENTRIC MACHINING
(2) 12" 3-JAW CHUCKS
3.1" BAR CAPACITY
12,000 RPM MILLING SPINDLE HSK63
40 POSITION TOOL CHANGER
MAIN AND SUB SPINDLE 4000 RPM
SMW PROGRAMABLE STEADY REST
COOLANT
CHIP CONVEYOR
AIR BLOW
装備
DMG MORI NTX 2500/1500 CNC 5-AXIS MILL/TURN CENTER, NEW 2019
FANUC 31iB5 WITH CELOS & MAPPS
HIGH ACCURACY CONTROL
EXCENTRIC MACHINING
(2) 12" 3-JAW CHUCKS
3.1" BAR CAPACITY
12,000 RPM MILLING SPINDLE HSK63
40 POSITION TOOL CHANGER
MAIN AND SUB SPINDLE 4000 RPM
SMW PROGRAMABLE STEADY REST
COOLANT
CHIP CONVEYOR
AIR BLOW
NEW PRICE TODAY APPROX $850,000
スペックシート
DMG MORI
NTX 2500 I 1500 2nd Generation
Basic Machine
J-A01868* NTX 250011500
Integrated Mill Turn Center
Tool spindle: 12,000/ 20,000 min-1 Axis travel XIYI ZI B: 675 (-125~+550)/ 300 (±150) / 1,562+164 mm/
240°(±120°)
[26.5 (-4.9~+21.6)/ 11.8 (±5.9)/ 61.4+6.4 in.]
Spindle 1 : 4,000 min-1
Bar work capacity : dia.80 (3.1]
Control
J-008071* J-003261*
Spindle
J-008478
Control F31iB5 with CELOS CELOS - ERGOline Touch
It is a machine operation panel with 21.5- inch multi touch screen, which realizes comfortable operability. It documents, visualizes and centrally manages the order, process and machine data, allowing the networking with CAD/CAM and also the function extension using applications. The user-friendly, highly-productive MAPPS system is installed.
Standard Spindle 1 turnMASTER FANUC Spec.
Output: 18.5 / 18.5 / 15 (25%ED /50%ED
/cont) kW
Maximum spindle speed: 4,000 min-1 Maximum torque : 599 / 505 / 409 (25%ED / 50%ED / cont) N·m
Spindle through hole diameter:
- Red: Various alarms
- Yellow: The cycle start prohibited
- Green: Automatic mode operation
- Blue: During Operation mode 2/3 being selected
- Red: Various alarms
- Yellow: Program end (M02/M30)
- Green: Automatic mode operation
*Buzzer function is not included. Please select the "Signal Light Buzzer" specification separately.
General Options
J-015964 Cable for Transformer (Cable Only), 55 kVA The cable (for 55 kVA) for connecting the transformer provided at the machine primary side to the machine.
*The transformer is not included.
J-004471 Setting Unit, MM
The unit to be used for the screen display and program commands is set to "millimeter (mm)".
Turning: "MM" specification for the turret
Horizontal machining center: "MM"
specification for the tapped pallet
• further description see attachment
NTX 2500 J 1500 2nd Generation Series J0212
Price status: 04/03/2019
Page 6 of 23
Technology Cycle
J-007828 Excentric Machining
It allows the eccentric machining on the turning center without using the special chuck or macro programs. The macro programs for the eccentric machining can be created by following the guidance.
*The X- and Y-axes synchronize with each
other according to the workpiece rotation amount. This results in a shift (eccentricity) of the rotation center. Limitation in the eccentricity are determined depending on workpiece geometry and machine stroke, etc..
*"High-accuracy control (G08)" is included in this specification. (NLX Series)
*When machining for a long time, there is a concern that the life of the feed shaft may be affected. In that case, it is necessary to take measures such as limiting the feed rate and monitoring the temperature of ball nut, and so please contact DMG MORI.
Options for Control
J-G00618 X-Axis Direction, JIS/ISO-Compliant
The X-axis movement direction is compliant with the JIS/ISO standard.
Screen Text Language
J-000080 Screen display English
Language on MAPPS Screen: English Language on MAPPS Warning Screen: English
Language on NC Screen: English Language on PC Screen: English
このタイプのリストを参照してください
すべてを表示このブランドのためのより多くのリストを参照してください
DMG MORI DMU 340P
マルチタスクマシニングセンタ
DMG MORI DMU 80P DUOBLOCK
立型マシニングセンタ(5軸以上)
DMG MORI NHX 5500
横型マシニングセンタ
DMG MORI DMU 50
立型マシニングセンタ(5軸以上)