Available Length: 12′ Maximum Outside Diameter Size Capacity while using tube stabilizer: 6″ schedule 40 Pipe 4″ Square Tubing 4″ Channel 4″ Angle Iron Maximum Outside Diameter Size Capacity not using tube stabilizer: 8″ schedule 40 Pipe at reduced length 6″ Square Tubing 5″ Channel 5″ Angle Iron Max Cutting Dimensions for 12′ Machine: Y-axis 10.5′ , X- axis 12.5″ , Z-axis 7″ Max Cutting Dimensions for 24′ Machine: Y-axis 22.5′ , X- axis 12.5″ , Z-axis 7″ Motors: Brushless Servo Motors on all axis Machine Power Requirements: 190-240VAC, 1PH with Neutral, 50/60Hz, 30A. Machine only. Optional automatic router control increases required amperage to 40A. Powermax 85 Input voltages: CSA 200 – 480 V, 1-PH, 50/60 Hz 200 – 600 V, 3-PH, 50/60 Hz CE 380/400 V, 3-PH, 50/60 Hz Input Current @12.2 kW CSA 200/208/240/480 V, 1-PH, 70/68/58/29 A 200/208/240/480/600 V, 3-PH, 42/40/35/18/17 A CE 380/400 V, 3-PH, 20.5/19.5 A Output current: 25 – 85 A Rated output voltage: 143 VDC Duty cycle @ 40°C (104°F) CSA 60% @ 85 A, 230 – 600 V, 3-PH 60% @ 85 A, 480 V, 1-PH 50% @ 85 A, 240 V, 1-PH 50% @ 85 A, 200 – 208 V, 3-PH 40% @ 85 A, 200 – 208 V, 1-PH 100% @ 66 A, 230 – 600 V, 1/3-PH CE 60% @ 85 A, 380/400 V, 3-PH 100% @ 66 A, 380/400 V, 3-PH Open circuit voltage (OCV): CSA 305 VDC CE 270 VDC Dimensions with handles: 500 mm (19.7″) D; 234 mm (9.2″) W; 455 mm (17.9″) H Weight with 7.6 m ( 25′) torch: 71 lbs CE 28 kg (62 lbs) Gas Supply: Clean, dry, oil-free air or nitrogen Recommended gas inlet flow rate / pressure Cutting: 189 l/min (400 scfh, 6.7 scfm) @ 5.9 bar (85 psi) Gouging: 212 l/min (450 scfh, 7.5 scfm) @ 4.8 bar (70 psi) Input power cable length: 3 m (10′) Power supply type Inverter – IGBT