タレット旋盤(ラム&ハメ)WARNER & SWASEY 4A M-3550 LOT 39
アメリカ合衆国概要
ブランド
モデル
4A M-3550 LOT 39
ID
529316
条件
中古品 - 良いです
年
1964
シリアルNo.
2056722
場所
アメリカ合衆国
在庫No.
L630460
4 A Used Warner & Swasey Square Head Saddle Type Turret Lathe
メトリックに仕様を変換します
Model | 4A M-3550 |
スイング | 28.25" |
Center Distance | 62 in |
タイプ | Saddle |
大きさ | 20' Long. X 84" Wide X 84" High |
重量 | 24,000 Lbs. |
装備
Note Reconditioning: Machine will have front & rear aprons and rapid traverse box reconditioned. Rapid traverse drive box reconditioned, new bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed, new filters and oil. New lockdown pin and bushing in hex and square turret. New nut and screw in cross slide and hex turret. Gibs reworked and refitted. New 24"4-jaw Gator chuck with reconditioning. It is recommended that you re-bore the flange tool holders on the rear turret to ensure they are on center once the machine is level. Machine will be cleaned, painted, and cycled. Machine may be seen under power with proper notice.
Price: $119,500.00 for the above work completed.
If you would like the machine reconditioned, the above work
will be started once the PO and deposit are received.
Estimated time frame eight weeks
スペックシート
Swing Over Bed Ways 28-1/4"
Swing Over Cross Slide Carriage 22"
Spindle Hole 9-1/4"
Center Distance 62"
Spindle Speeds 20 To 526 Rpm's
Spindle Nose A-15
Chuck Size 24" 4-Jaw New Gator
Feeds Cross .004 To .090 I.P.R.
Feeds Long. .005 To .167 I.P.R.
Main Motor 75 / 37.5 Hp.
Floor Space Right To Left 20'
Floor Space Front To Back 7'
Machine Height 80"
Weight 24,000 Lbs.
Flange Holders 4
Slide Tool (1) Yes
Tool Post 4 Way On Front Yes
Fixed Rear Turret Yes
Full Chip Pan And Coolant Yes
Coolant Yes
Note: Machine has been cleaned, painted and cycled. Good working condition.
Front Ways does have some scoring.
このタイプのリストを参照してください
GISHOLT 4L
タレット旋盤(ラム&ハメ)
GISHOLT 5L
タレット旋盤(ラム&ハメ)
WARNER & SWASEY 4A M-3550
タレット旋盤(ラム&ハメ)
WARNER & SWASEY M-3580
タレット旋盤(ラム&ハメ)
このブランドのためのより多くのリストを参照してください
WARNER & SWASEY LU4
ユニバーサル円筒研削盤
WARNER & SWASEY LCV5
プレーン&アングルヘッドを含む円筒研削盤
WARNER & SWASEY C5
プレーン&アングルヘッドを含む円筒研削盤
WARNER & SWASEY
プレーン&アングルヘッドを含む円筒研削盤