Specification from OEM Brochure (All details should be confirmed by buyer) *Originally Installed on a Mori Seiki NL2000 MCSY* *Spindle Liner ($495 ea), Vacuum Liner ($750 ea) and Sub Spindle Liner may need to be purchased* The LNS Blaze Air Unloader is engineered to unload parts from the machine sub- spindle automatically, and can be easily integrated into automated production cells. Ideally suited to bar feeding applications for twin spindle or sub- spindle machines with thru-hole. Complete diameter changeovers can be achieved in under 5 minutes years and no collets are required as vacuum is used for unloading. ~ LNS America, Inc. Blaze Air Brochure SPECIFICATIONS: Part Capacity - Diameter............................................1/4" - 3" Part Capacity - Length...............................................2" - 36" Unload Speed....................................................2 - 3 Seconds Unload Tray Capacity..................................................... 17" Unload Tray Location....................................................Front Electrics..............................................220V/3Ph/60Hz, 25 Amps EQUIPPED WITH: PLC Controlled This particular LNS Blaze Air Unloader was originally configured for a Mori Seiki NL-2000MCSY with a 1.0" vacuum liner. and is a right side - front discharge unit. It can be reconfigured to almost any sub-spindle or dual spindle turning center. New Replacement cost: $32,900 + liner Blaze Air vacuum liner for U36 (one required per finished part size)$750-1500 Lathe Spindle liner ...................$495-$640 Blaze Dimensions: 70" x 52" x 56" 1,600 lbs