BLUM-NOVOTEST 4-SQUARE
With the test rig the following parameters are measured and controlled: speed, torque, jouance, steering angle. Four shafts are simultaneously tested in a closed loop, with multi-block programs. Al...
BLUM-NOVOTEST COOLER
The impulse test stands are used to perform life-cycle tests for coolers. In addition to various pressure functions, the specimens are subjected to different temperature ranges. In this context, cu...
BLUM-NOVOTEST DOUBLE-CLUTCH
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST E-DRIVE TRANSMISSION
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FRONT-LENGHTHWISE
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FRONT-TRANSVERSE
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FUNCTION TEST RIG
The test rig is designed for measurement of functional values of drive shafts.
BLUM-NOVOTEST GAUGE/BURST
The test stand, shown on the first picture below, is designed for burst testing of hydraulic hoses or pipe sections at a max. pressure of 3000 bar. The key components of the test stand are a test ...
BLUM-NOVOTEST HEAVY-TRUCK
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST HOT/COLD BOOT TEST RIG
This climatic chamber is used to perform endurance tess of boots.
BLUM-NOVOTEST HYDRAULIC VALVES
The testing system consists of two autonomous conveyor belts, each with one loading section, 20 pallets, 3 test stations with drainage device as well as an unloading section with trays. All test st...
BLUM-NOVOTEST IMPULSE
The test stands are optimised for industrial testing norms, some of which use large hosediameters up to 2” as well as fluid temperature control up to 160 °C. The test stands are equipped with a wal...
BLUM-NOVOTEST IMPULSE AUTOMOTIVE
The test stands for the automotive industry allow the connection of up to 24 specimens. A special feature of the tests is the ability to perform reliable tests at temperatures ranging from -40 °C t...
BLUM-NOVOTEST LOW PRESSURE
Low-pressure test stands for gasoline hoses are computer-controlled test system for performing static and dynamic tests on hoses and hose systems with test fluids from high hazard categories such a...
BLUM-NOVOTEST MT IMPULSE
The MT series impulse test stands represent a cost-effective alternative because they are a modular solution. The standard machine contains the basic functions required for a standard impulse test,...
BLUM-NOVOTEST NVH TEST RIG
The NVH test rig is used to measure the forces and structure born noise generated or transmitted by automotive drive shafts.
BLUM-NOVOTEST QUASI-STATIC
The test rig is used to determine the break resistance of constant velocity drive shafts. Two opposite parallel shaft transmissions are connected by the test specimen and a slave shaft. In this loa...
BLUM-NOVOTEST QUASI-STATIC BREAKING
The test rig is used to determine the break resistance of constant velocity drive shafts. Two opposite parallel shaft transmissions are connected by the test specimen and a slave shaft. In this loa...
BLUM-NOVOTEST RETARDER BRAKES
Retarders are fitted as auxiliary brakes in commercial vehicles. Blum-Novotest constructs test stands for performing the final inspections of retarders. They are used to carry out the inspections r...
BLUM-NOVOTEST SWING RIG
The swing test rig simulates the movements of a transmission in the vehicle with regard to the installation location during uphill and downhill driving and at a roll angle of up to max. ± 65°. The ...
BLUM-NOVOTEST TEMPERATURE TESTS
Universal R&D test bench for pressure and function testing of automatic gearboxes and its components
