HENGSTEBECK + EICH HEP 100
Hydraulic high-speed single column press HEP 100 for universal use for pressing and joining work. The machine table is equipped with two diagonal T-slots and a through-hole for universal tool moun...
HENGSTEBECK + EICH HEP 100 - VARIANT
The hydraulic single column press HEP 100 is equipped with a tool for pressing starter rings onto commercial vehicle flywheels. The press is integrated into a roller table system, for this purpose...
HENGSTEBECK + EICH HEP 1000
Hydraulic single column press with double specimen punching tool. The hydraulic single-column press HEP 1000 is equipped with a power-regulated axial piston pump, a press control block with integra...
HENGSTEBECK + EICH HEP 140
Designed according to customer requirements for universal mounting of bearings on axles and shafts. The machine base and the machine table are designed in a U-shape to accommodate customer-specifi...
HENGSTEBECK + EICH HEP 200
The hydraulic high-speed single-column press HEP 200 serves as the basic machine for a fully automatic press system for the production of deep-drawn parts. The machine table is equipped with two d...
HENGSTEBECK + EICH HEP 2000
The HEP 2000 sample punch with a single tool is used to produce samples for technological material testing. Two transverse specimens are punched out in one operation. The resulting samples are take...
HENGSTEBECK + EICH HEP 225
Hydraulic single column press for integration in a production cell. There is an additional opening in the machine body for the robot gripper for equipping the press with a robot.
HENGSTEBECK + EICH HEP 25
Hydraulic single-column press with guided ram slide and a device for positioning axle springs. The pressure force, the upper end position of the ram slide and the block length of the car axle sprin...
HENGSTEBECK + EICH HEP 2800
Single column press with a machine table for holding tools for machining vehicle stabilizer ends. There are four block cylinders on the anti-twist plunger plate for actuating the additional functio...
HENGSTEBECK + EICH HEP 350
Executed according to customer requirements to accommodate existing stamping and embossing tools. The machine table is equipped with three T-slots arranged in parallel and a through-hole to hold t...
HENGSTEBECK + EICH HEP 600
For straightening aluminum extrusion profiles. The hydraulic single-column press HEP 600 is equipped with a digital axis control for the press cylinder, two driven material rolls and a protective ...
HENGSTEBECK + EICH HEP 63
Hydraulic single-column press with power-controlled drive and a differential circuit, the HEP 63 works as a hydraulic high-speed press. The maximum ram speed is 400 mm / sec.
HENGSTEBECK + EICH HEP 75
The hydraulic single-column press HEP 75 is equipped with a tool for pressing starter rings onto flywheels. Three electro-pneumatic flow sensors are installed to monitor the correct position of th...
HENGSTEBECK + EICH HEP 75 - VARIANT
The hydraulic single-column press HEP 75 is equipped with a tool for pressing starter rings onto flywheels. Three electro-pneumatic flow sensors are installed to monitor the correct position of th...
HENGSTEBECK + EICH HEP 900
The hydraulic single-column press HEP 900 is designed as a weld seam testing device. The test tool consists of a base plate with a die holder, two dies and a test mandrel arranged on the ram. The p...
HENGSTEBECK + EICH HEP- 250 EX
Hydraulic single column press with drive motor for the hydraulics and an electrical control cabinet in explosion-proof design. For pressing workpieces at risk of explosion. The press ram is control...
HENGSTEBECK + EICH HMP 1000
H&E offers the hydraulically operated multifunctional presses under the umbrella term HMP.
HENGSTEBECK + EICH HMP 1000 B2
H&E offers the hydraulically operated multifunctional presses under the umbrella term HMP.
HENGSTEBECK + EICH HMP 150
H&E offers the hydraulically operated multifunctional presses under the umbrella term HMP.
HENGSTEBECK + EICH HMP 1500
H&E offers the hydraulically operated multifunctional presses under the umbrella term HMP.
HENGSTEBECK + EICH HMP 2000
H&E offers the hydraulically operated multifunctional presses under the umbrella term HMP.
HENGSTEBECK + EICH HMP 350
H&E offers the hydraulically operated multifunctional presses under the umbrella term HMP.
HENGSTEBECK + EICH HMP 350 S
The HMP 350 S is equipped with a guided tool holder in a quick-change design. The shutdown of the rapid traverse is either path or pressure dependent. The tool protection consists of a protective c...
HENGSTEBECK + EICH HMP 350 S - VARIANT
Hydraulic multifunctional press type HMP 350 S with a machine table for holding punching and cutting tools.
HENGSTEBECK + EICH HMP 600
H&E offers the hydraulically operated multifunctional presses under the umbrella term HMP.
HENGSTEBECK + EICH HMP 600 - VARIANT
Hydraulic multifunctional press with a punching tool for machining the ends of car stabilizers. The machine substructure is open in the front area in order to ensure adequate space for machining th...
HENGSTEBECK + EICH HMP 600 B2
H&E offers the hydraulically operated multifunctional presses under the umbrella term HMP.
HENGSTEBECK + EICH HMP 600 S
Hydraulic multifunctional press for holding a stamping and embossing tool in special design. The ram plate and the machine table are equipped with two diagonal T-slots for holding tools. The tappet...
HENGSTEBECK + EICH HRP 1000 SPECIAL DESIGN
Hydraulic frame press in special design for integration into an existing production system for the production of connecting rod blanks. The machine table and press ram are equipped with T-slots arr...
HENGSTEBECK + EICH HRP 13000
Hydraulic locking and upsetting press for upsetting inductively heated pipe and rod ends. On the machine body there is a centrally arranged hydraulic cylinder for clamping the workpiece and two ex...
HENGSTEBECK + EICH HRP 1350
The HRP 1350 is designed as an assembly press. The press ram is actuated via a manually operated proportional valve. The press is equipped with an electrically monitored loading sliding door.
HENGSTEBECK + EICH HRP 1500
Hydraulically operated frame press HRP 1500 for pressing residual coils, with automatic workpiece feed. The frame press has a 16-fold guided press ram with the dimensions 2200x1200x800 mm. The two ...
HENGSTEBECK + EICH HRP 600 4S
Hydraulically operated frame press HRP 600 4S in four-column design for carrying out the folding test according to EN 10208 and API 5L. The press consists of a machine body designed as a solid wel...