LOCKFORMER ROTO NOTCHER
Dove-tail notch out of 24 to 30 gauge galvanized — in only one pass! Just cut to width and length or use scrap. This machine uses either 3" or 6" width blanks with simple adjustment.
ATM Q28B4×200
Model Q28B4×200 Min.Notching thickness(mm) Mild steel 0.5 strainless steel 0.5 Max.Notching thickness(mm) Mild steel 4 strainless steel 2 Min.Notching ang...
KURAKI KNCP-6
World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy
RAMS 2001
Notch drive cleats before or after they are formed. Mounts readily to a bench. Easy spring loaded push handle. Easy to change hardened shear blades.
TIN KNOCKER EDGE
Round surface edges for collars and end caps.
VICON EDGE NOTCHER
The Vicon Edge Notcher has an unlatching feature so that round pipe can be notched after it is rolled. Tap-in locks can be notched after they are roll formed. The punch will notch right up to the ...
GODSON GTCN
KURAKI KNCP-10
World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy
KURAKI KNCP-15
World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy
KURAKI KNCP-20
World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy
KURAKI KNCP-8
World’s Speed Leader At 1000 spm While Saving Labor and Retaining High Accuracy
TENNSMITH 16-18
The heavy cast iron construction allows the notcher to be used to side shear six inches of material to its rated capacity; and the throat behind the upper ram is beveled on one side to permit long ...
ACL Q28A4X250
EASTAR LE-416
JOUANEL ENC-150-15
JUWEI Q11-1.5X80
JUWEI Q11-A1.5X80
TTMC FN-1.5X80
BAILEIGH SN-F16-FN
Notching corners is a staple of any fabrication shop. Good clean notches are the difference between a great product and a not so great one. The SN-F16-FN sheet metal corner notcher is an economic...
BAILEIGH SN-F16-HN
The SN-F16-HN manual corner notcher is a high quality cast iron sheet metal notcher perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6" x 6" ...
JET HN-16T
JET’s high quality cast iron sheet metal notcher is ideal or any garage or sheet metal shop. It's compact design makes it perfect for on-site use. The cutting angle is fixed at ninety degrees and c...
KIDDER 68B
Long the industry standard, this popular 6" x 6" gauge Notch-Master comes equipped with reversible blades. This means that you can splay or pierce cut and adds coping to your capabilities. This mac...
KING INDUSTRIAL KC-N616
LOCKFORMER SPEEDNOTCH 16
Speednotch allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing. It’s the perfect tool for preparing ductwork to receive bar, slip or “S” a...
TIDE 130-5100
Specifications Model No.130-5100 Material Capacity 16Gauge Capacity 4Ton Notch 6×6×90° Stroke 3/4" Table dimensions 12"×18" Weight 210lbs Height(less hadle) 18-1/2"
TIN KNOCKER 1655
A heavy versatile tool capable of not only notching to capacity but also shearing and piercing operations in lighter gauge. Of heavy cast iron and fabricated construction, this table top machine co...
LOCKFORMER TDC NOTCHER
TDC NOTCHER comes standard with 5 notching heads. The Lockformer TDC NOTCHER will gang notch duct blanks as much as 6 times faster than notching by hand. The Hydraulic powered notch units have in...
SHEM HN-152
KIDDER 70-S-H
Truly the finest power notcher ever made combining smooth hydraulic force, safe convenient foot control, precision and versatility. The offset head permits full 6" x 6" corner notching in 14 gauge ...
KIDDER 70S
Perhaps the finest shearing machine ever made. This 6" x 6" notcher has patented split head that adjust in seconds to any tap up to 1". Blades are reversible for either splay or piece cutting, perm...
MANGE MG-831
VOGEL ECONO ARC-FIT 25
The Vogel #25 Econo Arc-Fit is the perfect tool for low-volume notching of light-wall fence industry tubing. This tool is complete with three cutting disks for notching 1-3/8”, 1-5/8” & 1-7/8 - 2” ...
BAILEIGH SN-F11-AN
The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal. The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so...
KNUTH RAX
Motorized Tube Notcher for continuous operation with 2 Hp electric motor
KIDDER 43B
Extra heavy duty notcher with capacity for 5" x 5" notch in 1/8" inch mild steel or 14 ga. stainless.The throat is 7" deep, permitting a full 5" x 5" corner notch. Comes with short or long handles ...
KIDDER 43BMP-S
This heavy duty hydraulically operated 5" x 5" notching machine can be used for shearing, squaring and trimming. Kidder's hydraulic system delivers smooth, safe power from 115VAC, under foot contro...
KIDDER 59H40
Cuts a full 7-1/2" x 7-1/2" notch in 1/8" steel or shears any length to 7" width. 14 gauge capacity in stainless. Will take a full corner notch. operation is hydraulic with jug type foot control. F...
EASTAR CHN-220
JENG JIH JHN-220
VOGEL ECONO ARC-FIT 25A
The Vogel #25 Econo Arc-Fit is the perfect tool for low-volume notching of light-wall fence industry tubing. This tool is complete with three cutting disks for notching 1-3/8”, 1-5/8” & 1-7/8 - 2” ...
EUROMAC FA200/6
BAILEIGH SN-F04-MS
If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is great for making perfect corners in m...
BAILEIGH SN-F09-MS
The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools. This corner notcher has a 9...
BAILEIGH SN-V04-MS
Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right? Enter the SN-V04-MS; this great machine is a 220 volt three ...
VOGEL 101-HPP
The ARC-TWIN notches both sides of pipe and tubing ends for T-joints with one stroke of the press. There is no deformation, all edges are clean and the “twin notches” form perfect T-joints for weld...
SCOTCHMAN AL1
The AL1 can be used to notch 3/4", 1" and 1-1/4" Schedule 40 Pipe. This hand-operated machine can easily be wall mounted.
SCOTCHMAN AL3
The AL3 can be used to notch 1-1/4" and 1-1/2" Schedule 40 Pipe. This machine can easily be wall mounted.
SCOTCHMAN ALU
The ALU can be used to notch a sink outflow in pipes with an external diameter of 1.0630" to 2.40158".
BOSCHERT LITE
BOSCHERT PN
8-7/8" x 8-7/8" x 5/32" BOSCHERT POWER NOTCHER MODEL PN4 S/N 1969 Year 1993 Capacity .........