AFC-HOLCROFT UBQ-243624
AFC-HOLCROFT UBQ-36483
AFC-HOLCROFT UBQ-367236
CM FURNACES 1100
CM FURNACES 125
DAVRON DTI-1000
The DTI-1000 batch oven dries ceramic material in a honeycomb catalyst product. Products, which can be either small blocks or trays of powder, are loaded onto a product cart. This product cart con...
DAVRON DTI-1004
The DTI-1004 batch ovens preheat steel molds used in the plastic industry. These batch ovens are designed so that the roofs are clear of all components, allowing the ovens to be stacked on top of o...
DAVRON DTI-1032
This Pre Heat Batch Oven is used in the plastic manufacturing industry to pre heat molds. The molds are steel and the maximum weight of molds per batch is 6,000 pounds. The oven utilizes a subway g...
DAVRON DTI-1046
The DTI-1046 batch drying oven is used to dry sheets of polyurethane foam. The product is loaded into the oven via custom product carts. The drying oven utilizes recessed floor tracks to accommod...
DAVRON DTI-1058
The DTI-1058 batch oven dries copper windings in large electrical transformers. The size of the part being processed in the oven is approximately 15′-6″ L x 9′-5″ W x 10′-3″ H. The part can weigh...
DAVRON DTI-1078
The DTI-1078 batch oven dries ceramic material in a honeycomb catalyst product. Product, which can be either small blocks or trays of powder, are loaded onto a product cart. The product cart cont...
DAVRON DTI-1086
The DTI-1086 Batch Curing Oven serves a dual purpose. It is used for both curing and performing reliability test on polypropylene windings. These windings are used in the manufacturing of Film Ca...
DAVRON DTI-1090
The DTI-1090 Batch Baking Oven is used for fast heat up of oil field piping used in the off shore drilling industry. The size of the piping being processed in the oven are approximately 14″ diame...
DAVRON DTI-1092
The DTI-1092 batch drying oven dries ceramic modules used in the power generation industry. The drying oven includes two (2) custom product pallets. These pallets are used for loading and unloadi...
DAVRON DTI-1096
The DTI-1096 batch oven is used to preheat steel molds used in the automotive industry. The molds are processed in groups of 12 and weigh approximately 16,000 pounds. The operating temperature ra...
DAVRON DTI-1109
This batch curing oven is used to cure a varnish on stators used in the manufacturing of electric generators. The oven utilizes two (2) individual chambers in one (1) common oven body with each ch...
DAVRON DTI-1118
The DTI-1118 inert atmosphere batch oven is used in the manufacturing of membranes that are used in blood purification processes.The oven can accommodate up to four (4) rolls of membrane in the ove...
DAVRON DTI-1123
The DTI-1123 custom inert batch oven is used in the plastics industry for annealing product. Approximately 2,000 pounds of product (plastic rods) are loaded into the inert atmosphere oven via a cus...
DAVRON DTI-1158
The DTI-1158 industrial oven is used to develop curing processes for brake pads in the automotive industry. This custom oven is designed to simulate the process used in an indexing or continuous fl...
DAVRON DTI-1195
The DTI-1195 custom preheat batch oven is used in the automotive industry to preheat wiring harnesses before being moved to the production line. The oven includes 2 full opening doors located on th...
DAVRON DTI-1202
The DTI-1202 custom preheat batch oven is used to heat a polypropylene product used in the automotive industry. The oven heats the product to simulate the extreme conditions that occur during the l...
DAVRON DTI-1225
The DTI-1225 drop bottom batch oven is used to process titanium parts. The system utilizes a rack system that lowers into and out of the oven. When the rack is in place it becomes the floor of the ...
DAVRON DTI-1239
The DTI-1239 inert batch oven is used to dry aluminum parts. The oven is a top load type oven and parts are placed in a basket for drying. The oven door is pneumatically actuated and opens and clos...
DAVRON DTI-1245
The DTI-1245 is a batch oven used for a closed-cell foam cure process. The airflow within the heated chamber is horizontal cross flow and includes the ability to automatically reverse the airflow d...
DAVRON DTI-1250
This batch oven is used to heat treat steel components used in the automotive industry. The parts are loaded in a basket and then loaded into the batch oven chamber. The oven is designed to process...
DAVRON DTI-1256
These batch ovens include two fully 316L stainless steel racks that can hold up to 14 trays of raw pharmaceutical ingredients to be dried. The racks are manually wheeled into the ovens flat floor, ...
DAVRON DTI-1258
The DTI-1258 provides a vertical up airflow to heat this particular product. The design velocity accounts for the pressure drop through the product to provide an efficient process. The powered cart...
DAVRON DTI-1360
The DTI-1360 provides a vertical up airflow to heat this particular product. The design velocity accounts for the pressure drop through the material openings to provide an efficient process. The po...
DAVRON DTI-1404
To achieve extremely low levels of oxygen the oven has been completely Heliarc (TIG) seal welded. All oven penetration has been minimized and sealed to ensure no air is pulled inside. A slight posi...
DAVRON DTI-233
The DTI-233 inert atmosphere batch oven is used in the carbonizing process of a ceramic product. This industrial oven operates under an inert atmosphere (nitrogen) and a positive pressure of 1.5″ W...
DAVRON DTI-291
The DTI-291 batch oven is used to dry trays of PTFE Powder. This batch oven is designed to accommodate an existing product rack that holds 40 trays per rack. Each tray weighs approximately 10 pound...
DAVRON DTI-298
This batch oven is used to dry a mold release coating onto custom molds used in the sporting goods industry. Control of the temperature in this application is very critical. The oven is constructed...
DAVRON DTI-342
The DTI-342 batch oven is used to dry a molded plaster product. The oven utilizes a humidity control system to maintain the required R/H within the heated chamber. This system allows for multiple R...
DAVRON DTI-389
The DTI-389 batch oven dries sheets of honeycomb product. Product is loaded into the custom product cart (provided with the batch oven) and loaded into the heated chamber for drying. Once the set ...
DAVRON DTI-397
The DTI-397 batch oven cures ceramic board product. This curing oven utilizes a hydraulically operated vertical door to provide a proper seal for the oven chamber, and conserve floor space by elimi...
DAVRON DTI-429
The DTI-429 inert atmosphere batch oven carbonizes ceramic product. Product is loaded into the industrial oven on the custom product cart provided with the oven. This inert oven utilizes a two car...
DAVRON DTI-488
The DTI-488 curing batch oven cures automotive brake pads, and is designed to cure two (2) full racks of product in a six (6) hour cycle. The batch oven cycle is a maximum of five (5) hours, with a...
DAVRON DTI-504
The DTI-504 batch oven cures automotive brake pads, and is designed to cure two (2) full racks of product in a six (6) hour cycle. The batch oven cycle is a maximum of five (5) hours and a one (1) ...
DAVRON DTI-507
The DTI-507 batch oven cures rubber printing press rollers, and is designed to meet Class 100 clean room requirements. This batch oven penetrates a wall separating the clean room from the rest of t...
DAVRON DTI-512
The DTI-512 inert atmosphere batch oven is used in the plastics industry. Approximately 8,000 pounds of product (plastic rods) are loaded into the inert atmosphere oven via a custom product cart. T...
DAVRON DTI-665
The DTI-665 batch oven heats steel molds, and is designed to hold an interior shelf system accommodating up to 36 steel molds. Molds are arranged in the batch oven in an array of six (6) deep and s...
DAVRON DTI-706
The DTI-706 batch oven cures silicone rubber on a tubing product. The rubber is added to the tubing, and the product is placed in the batch oven to be cured. The operation is fairly simplistic. The...
DAVRON DTI-810
This preheat batch oven is used in the food industry to preheat ingredients used in the manufacturing of snack foods. The oven features a sifter in the chamber. Product is loaded into the sifter th...
DAVRON DTI-8751
The DTI-8751 batch oven dries molded plaster product. A humidity control system maintains the required R/H within the heated chamber to +/-10%. This system allows for multiple R/H set points for va...
DAVRON DTI-9281
The DTI-9281 inert atmosphere batch oven is used in the manufacturing of O-Rings. Due to the by- products of the process, the interior of the oven, shelves, and all material in the circulated air s...
DAVRON DTI-9481
The DTI-9481 batch oven cures coating on large tooling. Product is placed on the product cart and loaded into the oven. This batch oven utilizes recessed floor tracks to accommodate the product ca...
EBNER HICON-BATCH
Sensitive alloys have to homogenized after casting to reduce the stress within the ingots. Homogenizing temperature is just below the melting point. The more precisely the temperature can be contro...
HIGHTEMP THN
THN HIGHTEMP Toughnite furnace is a pollution free method for soft nitriding of metals. Parts are treated at a temperature lower than the A-1 transformation point in a mixed gas atmosphere consisti...
HIGHTEMP TKM
Batch Type Integral Sealed Quench Furnaces provide the benefit of uniform heating from the sides through Radiant tube heaters located on either side. Integral Sealed Quench Furnaces from HIGHTEMP i...