Item KD400CL
Travel of X/Y/Z 320×400×300 mm
Table size 435×650 mm
Cut taper/thickness ±3°/80 °/mm
Cut accuracy
Octagon ±0.005 mm
Taper ±0.015 mm
Max. cut speed 180 mm2/min
Best Surface Finish ≤1.0 μm
Wire diameter Φ0.12-0.2 mm
Max. electrical current 7 A
Power <2 Kw
Voltage 3 phase 380V/50Hz or 220V/60Hz or 415V/50Hz V/Hz
Max load of table 400 Kg
Weight of machine 2600 Kg
Machine Dimensions(L×W×H) 1610×1400×2000 mm
Package Size(L×W×H) 1850×1600×2200 mm
Item Unit
Dielectric fluid
Volume of container 60L L
Dielectric fluid filtration
Dimensions of container(L×W×H) 850×570×600 mm
Container package dimensions(L×W×H) 1000×700×680 mm
Weight of container 80/60 kg
Item Unit
Controller type KDXP
Controller Dimensions(L×W×H) 600×800×1680 mm
Container package dimensions(L×W×H) 800×900×2000 mm
Weight of container 260/180 kg

CNC wire cutting EDM KD400CL is the one with X&Y axes servo motor controller. Comparing to stepper motor control, servo motor has feedback from servo motor and compensation, it could increase accuracy than stepper motor in long distance cutting, especially for jobs with numbers of holes in one pieces, for such kind CNC wire cutting works, locating accuracy is very important, it is not just accuracy of one single hole, also accuracy between each two holes. So we recommend KD400CL for electrical molds making works.
KD400CL has X,Y axes travel 320×400mm with X&Y axes servo control, it could cut all kind of conductive material such as steel, alloy, copper, titanium alloy and etc. Kingred’s CL series wire EDMs are equipped with hand control box to control movement of X,Y. So there is no hand wheel. KD400CL has coordinate on the screen of control software to check absolute and relative position of X&Y axes.
C” structure column design, machine head is installed in vertical direction, different from old “F” structure wire cut EDM, wire frame is in horizontal direction, there will be problem of swing of wire frame during wire feeding, on the contrary, for “C” structure, wire frame is in vertical direction, no problem of wire swing during wire feeding.