ROTO-FLO 3225
The machine is for the cold rolling of shafts and is equipped with two rack type forming tools and two slides on an extremely rugged "C"-shaped machine frame. ROTO-FLO is a process in which the met...
MORI SEIKI ZT-2500
Mori seiki ZT-2500 twin spindles, twin turrets, 10 inch chucks, Fanuc 18i-TA control, chip conveyor.
LEBLOND REGAL 15" X 30" REGAL
LeBlond Regal 15"x30" Gear Head Engine Lathe, Acu-Rite 2-Axis DRO, Tailstock, 3-Jaw and Collet Chucks Stock: 7171 Manufacturer: Leblond Model: Regal 15" x 30" Age: N/A Max Swing Over Ways: 15.5" Ma...
ACCURPRESS B837510
Hydraulic Squaring Shear Manufacturer: Accurpress, Inc. (Willmar, MN) Serial No.: 177 Model: Accurshear B837510 Date of Manufacture: 5 / 1981 Electrics: 230-460 Volt, 3 Phase, 50-60 Cycle Main Moto...
HITACHI SEIKI CA23-II
HITACHI SEIKI CA23-II CNC TURN MILL (Y & C Axis)
CHEVALIER FSG-2A818
8" Width 18" Length Chevalier FSG-2A818, 2X AUTOMATIC, 1998 SURFACE GRINDER
NIAGARA SC2-500-72-54
This nice 500 ton stamping press is hooked up and ready for an inspection. Tremendous value on a high tonnage stamping press.
USI CLEARING 200
Heavy duty gap frame / OBI press that is under power and ready to be loaded.
NIAGARA E-90
This press is priced to sell and is ready ASAP. Rare find at 6" stroke and 110 tons.
NIAGARA SC1-200-30-36
10" Stroke, 26" Shut Height with 10" Motorized Ram Adjustment, Video Available, Priced to Sell
ACCU-FINISH SERIES II
ACCU-FINISH SERIES II TOOL & CUTTER GRINDER
D.C. MORRISON K
1.25" Width 9" Stroke Morrison K KEYSEATER, 2 HP, Centering Vee, Swinging Clamp Bar,Taper, T-S
PACIFIC K500-20
500 Ton X 20’ Hydraulic Press Brake with 4 - Sided Bottom Die
ARBURG 520C 2000-800
175 Ton 12.7 oz Shot Size Injection Molding Machine
KALAMAZOO INDUSTRIES S10D
This is fresh from a closed shop. This machine was in their repair shop, it never saw production use.
HARDINGE CHNC-I
Hardinge CHNC I CNC Chucking Lathe, GE Fanuc 0T Control, 8 Position Turret, 16C Collet Capacity, Air Operated 16C Collet Closer, Miscellaneous Collets, Miscellaneous Turret Tooling, 230Volt, Coola...
FPT STINGER
FPT STINGER 5-AXIS CNC VERTICAL MACHINING CENTER, Heidenhain TNC 430 CNC Control, 51" x 39.3" Table, X=68.5", Y=55", Z=24", A=±185°, C=360°, HSK 63 Taper, 18000 Max Spindle RPM, 60 ATC, TSC, Chip C...
MORI SEIKI M-300L2
1993 Mori Seiki M-300L CNC Vertical Machining Center. Table: 133.7” x 21.2”. Load: 1540 lbs. X/Y/Z-Axis Travel: 120"/19.7"/18.5". 10,000 RPM Spindle, 7.5 HP Motor. Equipped with Mori Seiki MF-6M CN...
DOOSAN MV-4020LS
DOOSAN MV 4020LS Vertical Machining Center, CNC, 2008. Table size: 19.7" x 47.2", load: 1760 lbs. Travels: X: 40.2", Y: 20.1", Z: 24.6". Spindle: 15000 RPM, 40 Taper, 30 HP. Rapid traverse: all axe...
AWEA LP5021
1998 AWEA LP-5021 Heavy Duty Bridge Mill, used. X Travel: 196.8", Y Travel: 82.7", Z Travel: 29.9". Table: 197.6" L x 90.6" W. CAT50 Taper, 35 hp, 6,000 RPM, 32 ATC. Equipped with Fanuc 18-M CNC Co...
SNK FSP-120V 5-AXIS
For sale: SNK FSP-120V 5-Axis Aerospace Profiling CNC Vertical Machining Center. 1997 model, used condition. Features a 144" x 48” table, 22,000 lbs load capacity, 124" X-axis, 50" Y-axis, 28" Z-ax...
CHIYODA SP-8SST
8mm CNC Tube Bender LH - CCW
KOMATSU H1F45
Komatsu H1F-45 Gap Frame PressKomatsu H1F-45 Gap Frame Press
FANUC ROBODRILL T14-IBL
FANUC ROBODRILL T14-iBL DRILL TAP VMC (4 Axis)
MARVEL 2125A-PC60
Production ready Marvel 2125 APC-60 automatic bandsaw. Completely inspected, tested and verified by certified technicians. Re-painted 2024.
GLEASON 503
Used Hypoid Gear Lapper , overhauled in 1999 and since then it has been in use very little.. Eddy Brake,Hydraulic chucking to both heads.Pinion and cone motion switches 4 front and 6 at side.Very g...
BRIDGEPORT SERIES II SPECIAL
Excellent Condition with 3 Feeds and 4 Axis DRO
FANUC ROBODRILL T14-IAL
FANUC ROBODRILL T14-iAL DRILL TAP VMC (4 Axis)
DANIELI-BREDA 2200 MT OIL HYDRAULIC EXTRUSION PRESS (14365)
2200 MT Danieli-Breda Aluminum Extrusion Press (14365) available. Manufacturer: Danieli-Breda. Model: 22000 MT Oil Hydraulic Extrusion Press. Type: Extrusion Press. Condition: Used. Ideal for alumi...
GALLMEYER & LIVINGSTON 250
Fully Automatic Grinder, All Functions Working Properly
HAAS VF-2BYT
2006 Haas VF-2YT CNC Vertical Machining Center. Machine is in very good condition and can be inspected under power as needed. Options include: 10,000 RPM spindle, 30 HP/ 2 Speed Gearbox, MOM (Mi...
HAAS VF-2SS
2003 Haas VF-2SS CNC Vertical Machining Center. Machine is in very good condition and runs great. Options include: 4th axis prewire, rigid tap, 16 MB expanded memory, USB port, high speed machini...
HAAS ST-20Y
2020 Haas ST-20Y CNC Lathe features 31.75" swing, 21" machining length, 8.3" chuck, and 2" bar capacity. Equipped with 20 hp, 5,000 RPM spindle, tool presetter, auto door, chip conveyor, 6,000 RPM ...