Dentatrici a creatoreGLEASON 104 'CONIFLEX'
North Carolina, Stati UnitiPanoramica
Marca
Modello
104 'CONIFLEX'
Numero id. #
615580
Tipo/Modello
Luogo
North Carolina
Stati Uniti
Stati Uniti
Disponibilità
16634136
Gleason Model 104 straight bevel Coniflex machine , machine to be gone through , rebuilt and repaired as needed!!! Coming soon !!
Spec Sheet
Gleason Straight Bevel Coniflex Gear Generator
Model 104 s/n 29296 Partially Rebuilt
Machine will be delivered in Excellent working condition
This machine Has been gone through by our technician. we are
Rebuilding machine with new roller cam along with other items
on this machine. the work will be completed and can be viewed
under power when complete. PO required and down payment needed
to hold machine !
general machine specifications are below. Contact us for a full
report on work completed on this machine
CATALOG SPECIFICATIONS:
CONE DISTANCE(MAXIMUM)................. 4.25" (108MM)
CONE DISTANCE(MINIMUM)................. 0"(0MM)
PITCH ANGLE(MAXIMUM) 90 DEGREES........ 84DEGREES 18 MIN
PITCH ANGLE(MINIMUM)................... 5 DEGREES 42 MIN
EXTREME ANGLE (MINIMUM)................ 10:1
PITCH DIAMETER (MAXIMUM) RATIO 10:1.... 8.5" (216MM)
PITCH DIAMETER RATIO 1:1............... 6"
DIAMETRAL PITCH(COARSEST).............. 3DP (8.5 MODULE)
DIAMETRAL PITCH(FINEST)................ 20 DP (1.3 MODULE)
PITCH DIAMETER (MINIMUM) RATIO 1:1..... 6" (152MM)
DIAMETRAL PITCH (COARSEST)............. 3DP (8.5 MODULE)
DIAMETRAL PITCH (FINEST)............... 20 DP (1.3 MODULE)
FACE WIDTH (MINIMUM)................... 1-3/8" (35MM)
INDEX RANGE....................... 9-93 INCLUSIVE & MOST NO. S TO M175
PRESSURE ANGLES (DEGREES).............. 22,22.5,25 DEGREES
WORK SPINDLE TAPER HOLE (LARGE END).... 3-39/22" (100MM)
WORK SPINDLE TAPER PER FT.............. 39/64" (15MM)
DEPTH OF TAPER......................... 6"
SPINDLE HOLE DIAMETER THRU-BORE........ 2-7/16" (62MM)
SPINDLE NOSE TO MACHINE
CENTER................................. 1-1/2" TO 9" (3831-228.6MM)
CUTTER SPEEDS (FEET PER MIN)........... 98 TO 286
FEEDS (SECONDS PER TOOTH).............. 4.2 TO 69.2
MAIN MOTOR............................. 5HP 1800 RPM
HYDRAULIC PUMP MOTOR................... .75HP 1800RPM
COOLANT PUMP MOTOR..................... .5HP 3600RPM
FLOOR SPACE............................ 61.25"X84.25" (1556X2140MM)
MACHINE NET WEIGHT..................... 14,500 LBS (6.591 KGS)
Machine is equipped with the following
1 set up of change gears presently 0 the machine
1 set of cutter bodies for the machine
machine guarding (not photographed but included)
manual for operating machine and electrical drawings
contact us today as this machine will not last !!
This machine is being rebuilt and it will be available for sale
shortly ,it is being rebuilt by our technicians in our Statesville NC
facitlity. A complete work up of repairs done to this machine is available
upon request and full disclosure of work completed is available for review
upon inspection. Call us to discuss an inspection or schedule a visit,
go to WWW.PiselliEnt.com for more photos and/ or information on this
or other machine options
Visualizza altri immobili di questo modello
GLEASON 104 'CONIFLEX'
Dentatrici a creatore
Visualizza altri annunci per questo tipo
PFAUTER P1251
Dentatrici a creatore
KASHIFUJI KS-300NC
Dentatrici a creatore
KOEPFER 140
Dentatrici a creatore
KITAI 8F
Dentatrici a creatore
Visualizza altri annunci per questa marca
GLEASON 529
Gear Quenching Presses
GLEASON 36
Gear Quenching Presses
GLEASON 609
Generatori di ingranaggi conici
GLEASON 610
Generatori di ingranaggi conici