Die Specifications maximum die size: 109” L-R X 71” F-B X 21” tall maximum die weight: 10,000 lb. transfer height range: presses at approx. 33” to 60” above the floor 20,000 lb. (total capacity) Over/Under Die Cart Features: frame: structural steel weldments cart capacity: 20,000 lb. total cart capacity, each deck rated for one 10,000 lb. die cart drive system: 4 hp DC internal drive mobility method: poly casters cart drive controls: pendant controller with: forward/reverse, E-stop, left/right powered steering, and lift & push/pull controls drive wheel traction control: drive wheels are load bearing cart travel speed: infinitely variable from 0 to 120 fpm operator position (drive): walk along via tethered pendant (ride-on station is optional) steering: powered ±90° for high maneuverability cart deck size: Each deck is approx. 54" X 72” deck configuration: over/under dual elevation decks deck surface: UMMW lined steel plate deck over structure die guides: no guiding, large L-R dies hang over sides cart size: approximately 54"W X 158"L including mast lift & battery/drive push/pull device: dual rigid chain push/pull system on each deck for single stroke die transfers to/from the cart/press/rack steel-on-steel chain/die interface: manual lever to secure end of chain hooks to die brackets die brackets: 4 included, additional sold separately (2 required per die) die transfer height: variable deck height via hydraulic mast lift to provide deck height range from approx. 11” to 61” and 40” to 90” above the floor die stops: drop-into-socket die stops at transfer end of deck, permanent fixed die stops at non-transfer end press interface: one docking rail included (1 required for each press) rack interface: lip at transfer end of each deck to mate with bracket on shelf safety features: creep speed (approx. 30% of full speed) with lift deck raised, audible alarm, strobe light guarding: covers on moving drive components cart power: 24 VDC battery capacity: Steel case 1000 AH battery charger: fully automatic charger built in main control panel: power switch, battery gage, fuses, audible alarm