To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. Tanks are original and are Polypropylene. It is our intention to change the tanks to full stainless steel (7-10 week order from Crest). Stations: 1:Load Station 2:Ultrasonic Immersion, 40 KHz immersible (to be ordered, 4-7 weeks) 3:Ultrasonic Immersion Rinse, 132 KHz installed 4:Recirculating Hot Air Dry 5:Unload Station General Specifications: Working Tank (Polypropylene) Dimensions: 18" X 18" X 20" (18" liquid depth) [Left to Right X Front to Back X Depth X Liquid Depth] Outer Tank to be Stainless Steel Dimensions: 20" X 20" X 21" (19" liquid depth) [Left to Right X Front to Back X Depth X Liquid Depth] Process: DI water, DI water, Hot air dry Chemistry: Tank 1 & 2 (these are station 2 & 3) - Deionized Water Automation: Crest Model CTS-2000 Rigibot Transfer Facilities: 2-3 GPM DIW @1-2 Mohm, 30-35 psi and process temperature, 30-35 CFM CDA @ 30 psi, 1-2 CFM shop air @ 60 psi, unrestricted floor drain. Power Requirement: 240Volts /3 phase /60Hz /78Amps Work Flow: Left to Right Frame Material: Type 304 stainless steel support frame with leveling legs Access Panels • lift-out access panels on front Countertop A type polypropylene removable countertop. • The countertop is fitted with removable polypropylene drainbacks (between the process stations). Base plate & frame: type 304 stainless steel Rigibot CTS-2000-AB Control: Allen-Bradley Capacity: 200 lbs Travel Speed (Horizontal/Vertical): 100 / 17 FPM Positioning Accuracy (Horizontal/Vertical): +/- 0.36" / +/- 0.2" Machine Dimensions: 113" x 40" x 48" Machine Weight: 3,100 lbs