Operai siderurgiciGEKA HYDRACROP 110S
Illinois, Stati UnitiPanoramica
Marca
Modello
Numero id. #
552681
Tipo/Modello
Condizione
Nuovo in stock
Anno
2022
Luogo
Illinois
Stati Uniti
Stati Uniti
Diritto di recesso
Nello stato in cui si trova
Disponibilità
04282022
PRICE IS GOOD FOR SEPTEMBER PURCHASES ONLY PRICE AFTER SEPTEMBER IS $35,950.00
Geka Hydracrop 110 is an ironworker machine for punching, shearing, notching and angle, square and round bars cutting tasks. It can be managed by two workers at the same time thanks to its two cylinders. As a result, Geka Hydracrop 110 will save time and increase the efficiency of the user when working with its ironworker.
Geka Hydracrop 110 is part of Geka´s two-cylinder Ironworker machines series called Hydracrop. The five workstations of this ironworker machine are the following:
Punching
Angle shearing
Flat bars shearing
Bars cutting
Notching
FEATURES
Two independent working cylinders, one for the punch and one for the shear
Two remote foot pedals
Mitre cuts angles on 45° leg-in
Large single cut, no-slug-loss, "non-deform" angle cut
Large "non-deform" plate shear capacity, low rake on blade
Easy to adjust length of stroke
Ram keyed for shaped tooling
Quick change punch holder
Adjustable swing away stripper
Structural die holder for punching beams and channels in the flange
Deep punch throat 20"
Jog control
Round and square bar blades 3" and 4" channel shear blades
Rectangular coper or V-notcher
Plate shear support table with mitre guides
East to adjust blade gap
Safety lock-out for the coper/notcher station
Machine prewired for electric automatic length gauge
Easy access to the hydraulics (front and back)
Converti specifiche in sistema metrico
Angolo (L1) | 6" |
Angolo (L2) | 6" |
Angolo (T) | 6" |
Tonnellaggio | 110 T |
Potenza | 8.5 hp |
Incavo | 12" |
Corsa | 3" |
Dimensioni | 83 X 47 X 86 |
Peso | 7000 LBS |
Dotato
Geka Hydracrop 110 Ironworker Machines
2 Cylinders Hydraulic ironworker machine with 2 working areas and 5 workstations.
FEATURES
Two independent working cylinders, one for the punch and one for the shear
Two remote foot pedals
Mitre cuts angles on 45° leg-in
Large single cut, no-slug-loss, "non-deform" angle cut
Large "non-deform" plate shear capacity, low rake on blade
Easy to adjust length of stroke
Ram keyed for shaped tooling
Quick change punch holder
Adjustable swing away stripper
Structural die holder for punching beams and channels in the flange
Deep punch throat 20"
Jog control
Round and square bar blades 3" and 4" channel shear blades
Rectangular coper or V-notcher
Plate shear support table with mitre guides
East to adjust blade gap
Safety lock-out for the coper/notcher station
Machine prewired for electric automatic length gauge
Easy access to the hydraulics (front and back)
Geka Hydracrop 110 is an ironworker machine for punching, shearing, notching and angle, square and round bars cutting tasks. It can be managed by two workers at the same time thanks to its two cylinders. As a result, Geka Hydracrop 110 will save time and increase the efficiency of the user when working with its ironworker.
Geka Hydracrop 110 is part of Geka´s two-cylinder Ironworker machines series called Hydracrop. The five workstations of this ironworker machine are the following:
Punching
Angle shearing
Flat bars shearing
Bars cutting
Notching
Spec Sheet
FEATURES GEKA HYDRACROP 110/180
Punching Power 120 US Tons
Punching Ø1-1/2″ x 3/4″
Ø1-3/32″ x 1-3/32″
Shearing Power 180 US Tons
Shears of Flat Bars and Plates 24″ x 5/8″
16″ x 3/4″
Shearing of Angles
(without deformation) 6″x6″x1/2″
Shearing of Solid Round and Square Bars
(Optional Blades) Ø 2″ and □ 2″
Rectangular Notching 3-1/2″ x 2″ x 1/2″
Visualizza altri immobili di questo modello
GEKA HYDRACROP 110S
Operai siderurgici
Visualizza altri annunci per questo tipo
SCOTCHMAN 4014C
Operai siderurgici
MUBEA KLH 700/760
Operai siderurgici
EDWARDS 120 TON
Operai siderurgici
EDWARDS 100 TON DELUXE
Operai siderurgici
Visualizza altri annunci per questa marca
GEKA HYDRACROP 165/SD
Operai siderurgici
GEKA 110SD
Operai siderurgici
GEKA HYDRACROP 165/SD
Operai siderurgici