Torni CNCNAKAMURA-TOME WT-150
Stati UnitiPanoramica
Nakamura-Tome WT-150 Twin Spindle, Twin Turret CNC Multi-Axis Turning Center Lathe, New 2011, C-Axis, Y-axis, Live tooling, bar feeder
Converti specifiche in sistema metrico
| Diametro rotante | 12.2" |
| Lunghezza della lavorazione | 21.85" |
| Dimens. mandrini | 6" |
| Bar Capacity | 2" |
| Potenza | 20 hp |
| RPM massima | 5,000 RPM |
| Diametro di tornitura | 12.2" |
| Contropunta | No |
Dotato
Fanuc 18i TB CNC Control
two turrets upper turret with Y-Axis
C-axis on both main and sub spindle
live tooling on both turrets
with many live tools
chip conveyor
high pressure coolant
main collet chuck, sub 2-jaw chuck
only machined aluminum
Spec Sheet
Nakamura-Tome WT-150-II (MMY) Multi-Axis CNC Turning Center / WT150MMY / WT-150MMY
Specifications (subject to buyer verification):
Capacity
Max. Turning Diameter 7.5”
Standard Turning Diameter 6.7”
Distance Between Centers max. 29.6”, min. 7.9”
Max. Turning Length 20.3”
Bar Capacity 2”
Axis Travel
Slide Travel X1 / X2 6.6”
Slide Travel Z1 / Z2 20.3”
Slide Travel Y +/-1.4”
Slide Travel (B-axis) 23.7”
Rapid Feed X1 / X2 630 IPM
Rapid Feed Z1 / Z2 1575 IPM
Rapid Feed (B-axis) 1575 IPM
Rapid Feed Y 236 IPM
Left and Right Spindles
Spindle Speed 5000 RPM
Spindle Speed Range Stepless
Spindle Nose A2-5
Hole Through Spindle 2.5”
Hole Through Draw Tube 2”
C-axis
Least Input Increment degrees 0.001
Least Command Increment degrees 0.001
Rapid Index Speed 600 RPM
Cutting Feed Rate 1~4800 deg/min
C-axis Clamp Disk Clamp
Upper and Lower Turrets
Type of Turret Head Dodecagonal Drum Turret
Number of Tool Stations 24
Number of Indexed Positions 48
Tool Size Square / Round 1” / 1.3”
Rotating Tool
Visualizza altri annunci per questo tipo
Visualizza tutto
Visualizza altri annunci per questa marca
NAKAMURA-TOME SC-250
Torni CNC
NAKAMURA-TOME SUPER NTMX
Torni CNC 5 assi o più
NAKAMURA-TOME WT-300MMYG
Torni CNC 5 assi o più