Stampa questa pagina

GLEASON PFAUTER PSA 150 Stozzatrici ingranaggi

Informazioni sulla quotazione

ID #
491800
Azione #
683732
Marca
GLEASON PFAUTER
Modello
PSA 150
Tipo
Stozzatrici ingranaggi
Numero di serie
13.087
Controllare
Controllo numerico (SIEMENS 840 C)
Anno
1998
Condizione
Buona
Posizione
Germania

Specifiche

Diametro ingranaggio (massimo)
5.9055"

Dotato

* SIEMENS – CNC – Control Model 840 C with colour monitor and direct input of all relevant gear tooth data according to the Original GLEASON-PFAUTER Surface for an automatic working process with presettable roughing, finishing and spark-out cycles. Dialog software also with error diagnostic providing helpful information how to solve the problem. * Machine is equipped with an axial adjustable shaping slide as a full CNC-Axis in order to cut multiple gears in one set-up, also using a tandem-toolset for gears with different Sizes * Hydrostatic shaper spindle bearings/Straight guide. ( High Precision) * Built in table Workpiece Clamping device with a Hydraulic Collet clamping device on the table, in conjunction with a semi-automatic “ring” loading device where the blanks and the finished parts are picked off manually outside of the working area. Dia. of the pockets / workpiece 140 mm. * Complete Workarea Housing with Sliding door, * built in Coolant Unit with chip conveyor,

Spec Sheet

External Gear / Internal Gear max. Cutting-Ø                                          150   mm

Max. swing Ø of workpiece                                                                           300   m

 

Module range max.                                                                                          4  

Length of stroke max.  (Z2-Axis)                                                                 55   mm

 

Gear width approx.                                                                                          50   mm

Vertical adjustment of shaping head, approx. (Z-Axis)                             250   mm

Spindle taper                                                                                                      ?  

No. of strokes, infinitely variable                                                       50 – 1,300   /min

 

Table Ø / table bore (C-Axis)                                                                150 / 63   mm

 

Distance between Center of Shaping spindle and column                       350   mm

Mounting height between table and shaper spindle, up / down      250 / 580   mm

Radial Cutting Slide adjustment (X-Axis)                                                    290   mm

 

Feed range at tooth depth (Cutting Slide-X-Axis))                            1 – 5.000   mm/Min.

Feed Range Axial Shaping Slide adjustment (Z-Axis)                       15 / 125   U/Min.

Feed range Rotation of Tool resp. Table ( C2 and C-Axis)          235 / 1.000   U/min. (?)

 

Total electrical load, approx.                                           30 kW  -  400 V  -  50   Hz

Weight, approx.                                                                                           8.500   kg

Foto