J & W GH6266Y
- SpecAutre Caractéristiques de MetricDiamètre admissible25.984"Alésage broche3.1496"tr/min1,600 RPMDiamètre admissibleau-dessus de la glissère transversale16.535"
- Présentation du produit
Capacity
Swing Over Bed: 660mm
Swing over cross slide: 420mm
Center distance: 1000/ 1500/ 2000/ 3000mm
Swing over gap: 800mm
Valid length of gap: 240mm
Bed width: 390mm
Headstock
Spindle hole: 80mm
Spindle nose: Short cam-lock type
Spindle taper: 1:20 ф113
Spindle speeds(Number): 9~1600rpm (24 STEPS)/36~1600RPM (12 STEPS)
Feeds and threads
Metric threads range (kinds): 1-14mm (22 kinds)
Inch threads range (kinds): 28-2 t.p.i (25 kinds)
Moudle threads range (kinds): 0.5-7 MP (18 kinds)
Diametral threads range (kinds): 4-56 DP (24 kinds)
Longitudinal feeds range (kinds): 0.027-1.07mm/r (65 kinds)
Cross feeds range (kinds): 0.063-2.52mm/r (65 kinds)
Rapid feed:Long./Cross 1.9/4.5 m/min
Tool section 25 x 25mm
Max. travel of upper toolpost 145mm
Max. travel of lower toolpost 310mm
Tailstock
Spindle diameter: 75mm
Spindle taper: MORSE # 6
Spindle travel: 150mm
Motor
Main drive motor: 7.5KW
Coolant pump motor: 0.12KW
Rapid feed motor: 0.25KW - À propos de la société
Our company was founded in 1993. We are a comprehensive machine tool manufacturer with full range of metal turning and metal forming machinery We take care of all the machines’ after sale service as long as they are exported by us. During the warranty period, all the spare parts are free based on our warranty policy. With our international partners’ support, we are able to offer local after sale service for end users in the whole Europe, North America, South America and some Asian countries like India.