Specifications
Max. swing over bed 20"
Max. length of workpiece 80"
Max. swing over cross slide 12 1/2"
Max. Swing in gap 29-1/8"
Width of Bed 12"
Effective length in gap to spindle 6"
Effective length in gap to chuck jaws 3 1/2"
Spindle bore 3 1/8" | D1-8
Taper of spindle center M.T. #7
Spindle speeds 25-1,800 rpm / 12 steps
Longitudinal feeds 0.0011-0.063 IPR, 42 kinds
Cross feeds 0.0003-0.018 IPR, 42 kinds
Inch threads 2-112 TPI, 60 kinds
Metric threads 0.1-14 mm , 41 kinds
Diametral Pitch threads 4-112DP , 50 kinds
Module threads 0.1-7mm, 34 kinds
Max. travel of top slide 5"
Max. travel of cross slide 11 1/4"
Spindle length w/o chuck 17-1/2"
Leadscrew length X TPI 1 1/4" x 4 TPI
Diameter of tailstock quill 2-3/8”
Max. travel of tailstock quill 5-1/8”
Taper of tailstock quill center MT4
Main motor 10HP, 220V/30A or 440V/15A, 3 phase
Coolant pump 1/8 HP, 220V, or 440V, 3 phase
Net weight 6,350 lbs.
Overall dimensions, LxWxH 128" x 43" x 59"

Standard Equipment
Free Taper turning attachment, , installed
Free SINO DRO, installed
Chuck guard with safety shut off
Automatic kick-out longitudinal carriage stop system
10” 3-jaw chuck with top reversible jaws, direct mount
12” 4-jaw chuck, direct mount
14” Face plate
1/2”-6” steady rest with roller jaws
3” follow rest
Removeable gap
4-way tools post
Foot brake
Halogen Work light and coolant system
Full length splash guard
Dead centers
Thread chasing dial
Tool box and leveling pads