Subject to availability, prior sale, and terms & conditions of FRANKE CNC Sales Agreement, we offer for your consideration: One used 2002 DMG MORI DECKEL MAHO DMU 50 eVolution full 5-Axis simultaneous VMC: Fly into MKE to inspect under power in our Wisconsin showroom by appointment History Machine was manufactured at DECKEL MAHO Seebach GmbH in Seebach, Germany 5/2002 First installed new in the USA 6/2002 Clamp once, machine 5-sides Table on machine swivels 0-180 degrees and rotates 360 degrees which allows for 5-sided 5-axis simultaneous machining with 1 workpiece clamping. Working area Longitudinal (X) 19.7” (500 mm) Transverse (Y) 16.5” (420 mm) Vertical (Z) 15.0” (380 mm) Main drive AC motor spindle drive power 100% DC 33.5 hp (25 kW) AC motor spindle drive power 40% DC 46.9 hp (35 kW) Work spindles, tool mounting CAT 40 Speed range 18,000 rpm Number of gear steps None Maximum spindle torque 95.9 ft/lbs (130 Nm) Spindle bearing diameter 3.15” (80 mm) Tool changer Number of tools 60 Maximum tool weight 13.22 lbs (6 kg) Maximum tool diameter without vacant places 3.15” (80 mm) Maximum tool diameter with vacant places 4.13” (105 mm) Maximum tool length 11.02” (280 mm) Chip to chip time Approximately 6 seconds Feed Feed range, linear axes 787.4 ipm (20 m/min) Rapid traverse, linear axes 1,968 ipm (50 m/min) Path measuring system Direct, Heidenhain glass scales, resolution 1 um (0.00004”) for X/Y/Z Control Heidenhain MillPlus With electronic handwheel control Weight Weight of machine with NCSRT Approximately 11,374 lbs NC-rotary table with NC-swivel axis Clamping area 19.7” diameter x 15” (500 mm x 380 mm) Center bore 1.2” H6 diameter No./Spacing of T-slots 5/2.5” 14H7 Swivel axis (B axis) 0 degrees through 180 degrees Rapid traverse (Swivel B axis) 26 rpm Table swivel time, horizontal to vertical Approximately 1.5 seconds Rotary axis (C axis) 0-360 degrees (continuous, full 4th axis) Rapid traverse (Rotary C axis) 33 rpm Table loading maximum 440 lbs (200 kg) Table measuring system Direct, Heidenhain angle encoders for B & C axes Table cooling Drive cooling for B & C axis with heat exchanger Flood coolant Amount of coolant 52.8 gallons (200 l) Flow rate 5.28 gallon/minute (20 l/minute)