Tours CNCEUROTECH ELITE MULTIFLEX 545SLY
Colorado, Etats-UnisAperçu
Marque
Modèle
Carte identité
608943
Type
Année
2015
Emplacement
Colorado
Etats-Unis
Etats-Unis
Numéro de stock
604916
Eurotech Elite Multiflex 545SL-Y 5-axis CNC Turning Center, New in 2015
5-axis: X, Y, Z, C1, C2
VERY Low hours - sounds like new
Autre Caractéristiques de Metric
Diamètre admissible | 22.83" |
Usinage Longueur | 22.04" |
# Axe | 5 |
Capacité de la barre | 1.77" |
Taille mandrin | 6" |
Distance Between Centers | 22.04" |
Dia. tournage | 12.6" |
Alimentation électrique | 20 hp |
RPM Max | 5,000 RPM |
Contre-poupée | No |
Outillage direct | Yes |
Sous la broche | Yes |
# of Turrets | 1 |
Dimensions | 167" (w/ Conveyor) x 77" x 79" |
Poids | 11,000 lbs |
Équipé avec
Fanuc 32i-B CNC Control, Axes: X,Y,Z,C1,C2
LNS Alpha 552 Magazine Barfeed, 12' Capacity
Parts Catcher AND Parts Conveyor
Chip Conveyor
OD/ID Tools, (1) Cross Drill and (3) Live Z axis (axial) tools included - Algra T134-0007
Transformer (TBD)
Cutting Hours: 4286
Note: This is the newer USA model for the Eurotech Elite Multiflex 545SL--Y
Fiche technique
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Bar Capacity: 2"
Machining Diameter: 12.60"
Machining Length: 22.04"
Swing Over Diameter: 22.83"
Y-Axis Stroke: +2.36 / -1.97"
Main Spindle
Draw Tube Capacity: 2.04"
Spindle Bore: 2.34"
Spindle Speed: 5,000 RPM
Spindle Motor: 20 HP
Spindle Nose: ASA 5"
Sub Spindle
Bar Capacity: 1.77"
Spindle Bore: 2.16"
Spindle Speed: 5,000 RPM
Spindle Motor: 15 HP
Spindle Nose: ASA 5"
B-Axis Travel: 19.29"
Rapid Traverse Rate (B-Axis): 1181 IPM
Spindle Positioning (Fully Programmable): .001 Degree
Turret
Indexing Time: 0.2 Seconds/Position
Indexing Type: Bi-Directional
Number of Stations: 12
Live Tools
Number of Positions: 12
Motor: 5 HP
Tool Speed: 4,000 RPM
Drilling Capacity: 25/32"
End Mill Capacity: 25/32"
Machining Capacity: .5"
C-Axis
Main / Sub Spindle: Yes
Spindle Positioning: Full C
Command Increment: 0.001 Degree
Positioning System: Scale Feedback
Degree of Movement: Programmable
Rapid Speed Rate: 100 RPM
General
Voltage: 400 V AC/3 Phase
Air Required: 80 PSI @ 4 CFM
Amperage Draw: 45 Amp
Shipping Dimensions: 122" x 76" x 91" 11,000 lbs
Chip Conveyor: 108" x 52" x 51" 1,000 lbs
Transformer: 29" x 24" x 43" 500 lbs
Barfeed (LNS Alpha): 187" x 35" x 55" 2,500 lbs
Voir plus de ce modèle
EUROTECH ELITE MULTIFLEX 545SLY
Tours CNC
EUROTECH ELITE MULTIFLEX 545SLY
Tours CNC