LOCKFORMER AUTO-GUIDE FLANGER 16
These ductwork prep machines automatically follow any edge – curved or straight. Use the convenient table slot to turn up a "starting flange" and let it go! A calibrated dial can be set for radii a...
LOCKFORMER BUTTON PUNCH SNAP-LOCK
Roll single-direction curves down to a minimum radius of 3-1/2” inside or a 5” outside radius, almost automatically. These punched right-angle flanged curves fit perfectly in the receiver formed on...
LOCKFORMER EASY EDGER
Turn perfect flanges on elbows or other curved fittings as fast as you can notch them. No gauge to set. Hand clamps to my bench. 20 gauge maximum.
RAMS 2002
This unit is designed for forming a 7/32" right angle flange, for both inside and outside radiuses. This unit can also be used on duct elbows as well. The unique design features Torrington Needle B...
RAMS 2003
RAMS 2007
This unit comes mounted in a heavy duty cabinet. The RAMS-2007 Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. It has an adjustable "auto guide" which can be...
RAMS 2007-AA
RAMS-2007-AA: This unit comes mounted in a heavy duty cabinet. The RAMS-2007-AA Power Flanger will form a 7/32" right angle flange on either straight or curved pieces. The Auto Adjust feature self ...
RAMS 2008
TIN KNOCKER 16
A perfect partner for the TK 16-gauge Pittsburg Roll Former Puts a 3/8″ outside flange on straight or curved sheet metal edges Puts a flange on material with a diameter of as little as 2″
TIN KNOCKER 20
This power flanger has the “auto-guide” feature, which automatically controls the forming of a right-angle flange. It will contour and follow any edge, straight or curved. Using the convenient tab...
TIN KNOCKER MANUAL FLANGER
Puts 7/32" flange on elbows and other radius fittings. Bench mounted, there is no gauge to set, and requires no special tools. Makes for EASY EDGING.