Specifications
Max. swing over bed 32”
Max. length of workpiece 80”
Max. swing over cross slide 22-7/16”
Max. Swing in gap 40-1/2”
Width of Bed 16”
Effective length in gap to spindle 10”
Effective length in gap to chuck jaws 7”
Spindle bore 4-1/8” , D1-8
Taper of spindle center MT#5 with1:20 reducing sleeve
Spindle speeds 25-1,600 rpm / 12 steps
Longitudinal feeds 0.0016-0.055 IPR, 60 kinds
Cross feeds 0.0008-0.027 IPR, 60 kinds
Inch threads 80-7/16”TPI, 54kinds
Metric threads 0.45-120 mm , 54 kinds
Module threads 0.25-60 mm, 46 kinds
Diameter pitch threads 60-0.25 DP , 42 kinds
Max. travel of top slide 9-1/8”
Max. travel of cross slide 16-1/2”
Longitudinal rapid traverse 18 ft / min.
Cross rapid traverse 8 ft / min.
Diameter of tailstock quill 3-1/2”
Max. travel of tailstock quill 6”
Taper of tailstock quill center M.T. # 5
Max. weight of workpiece 2,000 LBS
4-way tool post size 1” x 1”
Longitudinal leadscrew diameter / pitch Diameter: 3” Pitch: 2 TPI
Main Motor 15 HP, 220V/40A / 440V/20A, 3 phase, prewired on 220V
Rapid traverse motor 1/3 HP, 220V/440V, 3 phase, prewired on 220V
Coolant pump motor 1/8 HP,220V/440V, 3 phase, prewired on 220V
Machine weight, approx.9,350 LBS
Overall dimensions, LxWxH 146” x 48” x 67”

Standard Equipment
Free SINO DRO, installed
Free Taper turning attachment, , installed
12” 3-jaw chuck with top reversible jaws
16” 4-jaw chuck
20” Face plate
10” drive plate
¾”-7-1/2” steady rest with roller jaws
1”-5” follow rest
Removable gap
4-way tools post
Chuck guard with safety shut off
Foot brake
Halogen Work light
coolant system
Full length rear splash
(2) dead centers and (1) reducing sleeve
Thread chasing dial
Tool box and leveling pads