Max swing over bed Φ800 mm
Max swing dia.over slide Φ600 mm
Max turning diameter Φ630 mm
Max turning length 1500 mm
Hydraulic chuck diameter Φ250（10″） mm
Spindle nose A2-8（GB/T5900.1）
Spindle thru-hole Φ105 mm
Spindle bearings(front/rear) Φ160/Φ140 mm
Spindle speed 50-5000 r/min
Main motor power (cont/30min) 67.4/80 kW
Max output torque of spindle 795 Nm
Slant angle 45° DEG
X/Z-axis travel 385/1500 mm
X/Z-axis rapid traverse 36/36 m/min
X/Z-axis servo motor torque 37/37 Nm
X/Z-axis ball screw diameter Φ40/Φ50 mm
Number of stations 12
Tool section(turning/boring) 25×25/Φ50 mm
Min controlled angle 0.001 DEG
Motor of revolving tool 9.7 kW
Speed of revolving tool 10000 r/min
Max end milling dia/tapping size Φ25/M18 mm
Quill dia/travel φ130/150 mm
Taper of center 6 MT No.
Run-out of spindle 0.0005 mm
Periodical axial slip of spindle 0.001 mm
X/Z-axis repeatability 0.003/0.003 mm
Power source 100 kVA
Dimension(L×W×H) (without chip conveyer) 5260×2607×2335 mm
Dimension(L×W×H) (with chip conveyer) 5967×2607×2335 mm
Dynamic/static spindle hydraulic station and oil cooler,water cooler(L×W×H) 4500×1500×2000 mm
Gross weight(net weight) (incl:Dynamic/static spindle hydraulic station and oil cooler,water cooler) 13500（15000） kg