The range of PH press brakes is ADIRA’s answer to the most demanding needs of our customers — “heavy-duty”.
Ram parallelism (hydraulic synchronisation).
Bending depth.

Main Features:
- Four-point guiding system, with few maintenance requirements
- Assurance of adequate alignment between tools Ram slope for conical bending
- Dedicated CNC controls (controlling parallelism and bending depth)
- Optoelectronic protection system in the form of non-material barriers or a laser beam
- Very high approximation speed Deep arch
- Wide opening and long stroke

Benefits:
- Easy regulation of the bending depth (with the ram in loading condition for sheet metal);
- Electric-hydraulic synchronisation of the movable ram (Y1 and Y2 axes);
- Electric-hydraulic stoppage of the movable ram at 0.01 mm; Comprehensive programming of the bending angle;
- Movable ram slope programming (Y1 and Y2);
- Programming work/return speeds (10-100%).

With a bending capacity of up to 20,000 kN and lengths of up to 8 metres (tandem solutions can handle longer lengths), this range has electric-hydraulic controls.

The position of the ram is constantly monitored through linear guides located at the ends of the frame, ensuring 0.01 mm of repeatability of ram positioning.