Fresadoras VerticalesKINGSTON KMT-5V
Texas, Estados UnidosVisión General
Marca
Modelo
ID #
618542
Condición
Usado - Excelente Estado
Año
2014
# de Serie
13370
Ubicación
Texas
Estados Unidos
Estados Unidos
# de Inventario
M282462
10" X 50" Kingston Vertical Knee Mill Model KMT 5V Year 2014
The KMT-5V is the most robust machine in Kingston's celebrated line of KMT mills. The KMT-5V features a 5 HP motor and an NT#40 nose; the rugged design and sturdy head housing ensure this well-built machine will last for years. Turcite-B, which coats the sliding surfaces of the X- and Y-axis for optimal performance, and Meehanite casting make these mills ready to tackle all types of projects. The spindle contains a Class 7 precision bearing and a maximum runout within .0002 inches, with spindle speeds up to 4200 RPM. The knee and table ways are hardened and ground, while a heavy-duty saddle support runs the full width of the table for extra stability. Every shop needs at least one mill – the KMT-5V has you covered.
Standard Features:
5 HP Motor, NT#40 Nose
Square Ways in Both Y & Z Axis
Meehanite Casting
Turcite-B on X & Y Axis
Class 7 Precision Bearing (P4) for Spindle
Dual Locks on Knee, Table, Saddle, & Ram
Max Spindle Runout .0002
Convertir Especificaciones al Sistema Métrico
| Mesa-A | 10" |
| Mesa-L | 50" |
| Recorrido Longitudinal | 36" |
| Recorrido Transversal | 17.5" |
| Conicidad | NT #40 |
| RPM | 4,200 RPM |
| Potencia | 5 hp |
| Dimensiones | R-L 67.7" X F-B 59.4" X Height 93.6" |
| Peso | 3,630 Lbs. |
Hoja de Especificaciones
Table Size.................................................10" X 50"
Table Weight Capacity......................................1,500 Lbs.
T-Slots On Table...........................................3
Travels:
Longitudinal...............................................36"
Cross......................................................17.5"
Knee Vertical..............................................17.5.5"
Ram........................................................24"
Swivel Of Head.............................................+/- 90 Degrees
Over Arm Swivel............................................360 Degrees
Spindle Speeds
Low Speed Range, Variable..................................60 To 550 Rpm's
High Speed Range, Variable.................................550 To 4,200 Rpms
Main Spindle Taper.........................................N.S.T.40
Spindle Traverse...........................................5.5"
Feeds Per Spindle Resolution...............................0.0015, 0.003 & 0.0047
Main Motor.................................................5 Hp. 240/ 480 Volts
Floor Space:
Right To Left..............................................67.7"
Space Front To Back........................................59.4"
Height.....................................................84"
Weight.....................................................3,630 Lbs.
Newall 2 Axis D.R.O. System................................Yes
Power Feed On Table........................................Yes
Manual Milling Machine Options: Prices Subject To Change Without Notice
..........................Description.......................Price
Power Tool Lock:
Maxi Torque Power Draw Bar System for 40 Taper..............$990.00
Install Air Draw Bar .......................................$175.00
Riser:
4” Riser Block with Hardware................................$690.00
6” Riser Block with Hardware................................$790.00
10” Rise Block with Hardware................................$825.00
Installation................................................$175.00
Power Feeds:
Servo Dynamo Power Table Feed:
SERVO Dynamo 150 Table Feed – Longitudinal..................$895.00
SERVO Dynamo 150 Table Feed – Cross.........................$990.00
SERVO Dynamo 150 Table Feed – Knee..........................$1,090.00
SERVO 150 Inch Pound Table Feed - Longitudinal..............$980.00
SERVO 150 Inch Pound Table Feed – Cross.....................$1,290.00
SERVO 200 Inch Pound Table Feed – Knee “ 300 Series”........$1,490.00
Table Feed Installation ....................................$150.00
Cross Feed Installation ....................................$275.00
Knee Feed Installation......................................$425.00
Tooling:
WEBB -1111
11 Piece R8 Collet Set, 1/8 to ¾ by 16ths Pro Series........$189.00
WEBB-1126
6” Precision Machinist Vise ................................$780.00
6” Precision Vise Economy...................................$670.00
52 Piece Work Hold Down Clamp Set...........................$169.00
8" Inch Rotary Table / vert. and Horiz......................$995.00
10"Inch Rotary Table / vert. and Horiz......................$1,295.00
12"Inch Rotary Table / vert. and Horiz......................$1,490.00
D.R.O. System:
Newall 2 Axis Table, Cross Installed .......................$3,650.00
Newall 3 Axis Table, Cross And Knee Installed...............$4,450.00
Mitutoyo Digimatic Quill Scale With Bracket Installed.......$1,150.00
ALL PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vea más anuncios de este Tipo
MATSUZAWA MZ-V5
Fresadoras Verticales
HASEGAWA HMC-S4V
Fresadoras Verticales
SHOUWA 1 1/2
Fresadoras Verticales
Vea más anuncios de esta marca
KINGSTON HI-29120
Tornos Paralelos
KINGSTON CL38CX3000
Tornos CNC
KINGSTON OIL COUNTRY 30 HK 3000
Tornos CNC