DynaPath DMC mill centers feature an unique eight-station tool changer that enables batch production using standard 40-taper tooling. The X, Y, and Z axes ways use roller-type linear rails that offer a balance of high rigidity and speed, allowing a rapid speed of 20 m/min (780 IPM). The 8000 RPM belt-driven spindle is dual wound, offering improved torque characteristics in the low winding when operating at under 1800 RPM. For the operator, the versatile WinDelta control allows manual DRO, semi-automatic, and also fully automatic operation of the machine by running standard G-Code. Furthermore, Conversational Programming and DXF CAD capabilities enable the operator to program right at the machine.

Especs

Convertir Especificaciones al Sistema Métrico

X	31.4"
Y	15.7"
Z	19.6"
Potencia	7 hp
RPM	8,000 RPM
Conicidad	BT40 / CAT40
Mesa-A	16.5"
Mesa-L	33.5"
# Ejes	0
Dimensiones	87" X 87" X 91"
Peso	8360

Equipado Con

Automatic 4 Way Tool Changer CNC Rigid Tapping C3 Class Precision Ball Screws Auto Lubrication System Full Enclosure Flood Coolant System & Chip Recovery Tray LED Work Light Tri color Light Post Tools and Toolbox One Year Warranty on All Parts OPTIONS: Optional Spindle Probe and Automatic Tool Setter allow fast and accurate part setup. MPG RUN feature allows easing into a part program by synchronizing machine feed motion with the turning of the electronic MPG handwheel. Program RETRACE feature allows starting the part program at any specified block.

Hoja de Especificaciones

MODEL DMC-845L TYPE Mill Center TRAVEL XYZ 800 x 400 x 500 mm (31.4" x 15.7" x 19.6") AXES TYPE X/Y/Z Linear Roller / Linear Roller / Linear Roller SPINDLE NOSE TO TABLE 110 - 535 mm (4.3-21.0") TOOL TO COLUMN 435 mm (17.1") MOTORS X/Y/Z 0.85 / 0.85 / 1.35 kW Direct Drive SPINDLE TAPER BT40 / CAT40 SPINDLE DIAMETER 127 mm (5.0") SPINDLE RPM 50-8000 RPM SPINDLE MOTOR 5.5 kW (7 HP) Belt Drive SPINDLE RATED TORQUE 36 N-m (26.55 ft-lb") TOOL CHANGER 8-Station Independent Arm MAX TOOL SPEC Ø63 mm (Ø2.4") / 5 kg (11.0 lbs) MAX RAPID SPEED X/Y/Z 20 m/min (787 IPM) POSITIONING ACCURACY 12 um (0.000472") REPEAT ACCURACY 6 um (0.000236") TABLE SIZE 850 x 420 mm (33.5" x 16.5") TABLE SLOTS x OFFSET x WIDTH 4 x 85 mm x 18 mm (4 x 3"11/32 x 45/64) MAX TABLE LOAD 200 kgs (440 lbs) MACHINE WEIGHT 3800 kg (8360 lbs) SHIPPING L x W x H 2200 x 2000 x 2310 mm (87" x 79" x 91") MACHINE L x W x H 2200 x 2200 x 2310 mm (87" x 87" x 91") COOLANT CAPACITY 200 L (50 gal) AIR REQUIREMENTS 6 kg/cm2 (90 psi) POWER REQUIREMENTS 15 kVA, 3 Phase, 220V

Sobre el Vendedor

Vea la Información de la Compañía

Solicitar una Cotización

Agregado a la Lista de Cotización

Solicitud enviada el 19/11/2024