To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. General Specifications: Bar Capacity: 2" Machining Diameter: 12.60" Machining Length: 22.04" Swing Over Diameter: 22.83" Y-Axis Stroke: +2.36 / -1.97" Main Spindle Draw Tube Capacity: 2.04" Spindle Bore: 2.34" Spindle Speed: 5,000 RPM Spindle Motor: 20 HP Spindle Nose: ASA 5" Sub Spindle Bar Capacity: 1.77" Spindle Bore: 2.16" Spindle Speed: 5,000 RPM Spindle Motor: 15 HP Spindle Nose: ASA 5" B-Axis Travel: 19.29" Rapid Traverse Rate (B-Axis): 1181 IPM Spindle Positioning (Fully Programmable): .001 Degree Turret Indexing Time: 0.2 Seconds/Position Indexing Type: Bi-Directional Number of Stations: 12 Live Tools Number of Positions: 12 Motor: 5 HP Tool Speed: 4,000 RPM Drilling Capacity: 25/32" End Mill Capacity: 25/32" Machining Capacity: .5" C-Axis Main / Sub Spindle: Yes Spindle Positioning: Full C Command Increment: 0.001 Degree Positioning System: Scale Feedback Degree of Movement: Programmable Rapid Speed Rate: 100 RPM General Voltage: 400 V AC/3 Phase Air Required: 80 PSI @ 4 CFM Amperage Draw: 45 Amp Shipping Dimensions: 122" x 75" x 91" 11,000 lbs Chip Conveyor/Pan: 108" x 52" x 51" 1,000 lbs High Pressure Coolant: 42" x 19" x 42" 500 lbs Barfeed (LNS QL Servo): 92" x 67" x 51" 1,500 lbs