USED Hardinge Cobra 65 CNC LATHE, Fanuc 21i-TA, Tailstock Swing diameter over upper way cover (max) 22.00"/558.8mm Z-Axis travel (maximum) ................. 31.00"/787.4mm HARDINGE 10" POWER 3 JAW CHUCK WITH 25C HYDRAULIC COLLET SYSTEM !!! Spindle configuration ................... ANSI A2-8 Draw tube type .......................... Hydraulic Round 25C collet (Through Capacity) ..... 2.559"/65mm 25C Step chuck (Gripping Capacity) ...... 8"/203mm AC Digital Spindle Drive System: Horsepower rating (Intermittent) ........ 29.5HP/22.0kW Horsepower rating (Continuous) .......... 24.8HP/18.5kW Standard Torque rating (Intermittent) ............ 138ft-lb/187.1Nm Torque rating (Continuous) .............. 116ft-lb/157.3Nm Speed range (1-rpm steps) ............... 35 to 4,500 rpm Carriage and Cross Slide X-Axis travel (maximum) ................. 9.57"/243.1mm X-Axis traverse rate (maximum) .......... 472ipm/12mpm Z-Axis traverse rate (maximum) .......... 787ipm/20mpm Z-Axis thrust (maximum) ................. 1,900lbs./8451Nm Vertical Turret (Bidirectional) No. of stations ......................... 12 Square shank tool size (maximum) ........ 1" 25mm Round shank tool sie (maximum) .......... 1 1/2" 40mm Tailstock (Optional) Manual positioning ...................... Hydraulic Quill Morse taper #/conter .................... MT No. 4 Travel of tailstock base ................ 33.0"/838.2mm Quill travel ............................ 6.0"/152.4mm Thrust @ 500 psi (maximum) .............. 1,500lbs/6672.2Nm Miscellaneous Compressed air requirement .............. 70 to 90 psi 5 to 6 sclm Coolant tank capacity ................... 47gal/177.9L Approximate shipping weight ............. 9,000lbs/4086kg Machine dimensions: Length................................... 123.5"/3136.9mm Add'l length with chip removal system ... 42.73"/1085.3mm Depth ................................... 68.0"/1727.2mm Height .................................. 73.0"/1854.2mm Power Requirements ............ 230 Volts/3 Phase EQUIPPED WITH: - RS-232 SERIAL PORT - HARDINGE 10" POWER 3 JAW CHUCK WITH 25C HYDRAULIC COLLET SYSTEM !!! - 12 POSITION TURRET - TAILSTOCK - CHIP CONVEYOR - ALL AVAILABLE TOOLHOLDERS AND MANUALS - SOME COLLETS SEE ADDITIONAL PICTURES HOURS ON METER 14,377 General specifications from literature and must be verified CAN BE SEEN UNDER POWER ON OUR FLOOR, AVAILABLE IMMEDIATELY, NO LOADING CHARGES