MAIN FEATURES OF THIS MACHINE: All Hardened and Ground Steel Gears in head, for much heavier cutting capability, particularly when compared with plastic gear equipped models Compact Size for smaller work shops, but has more weight and power to remove material when needed Table Graduations in .001″ on X and Y with a true Inch Pitch Leadscrew, leads to easier operation when tolerances matter Main Column is attached to the base with 4 bolts from the top, with a very wide mounting surface for much more rigidity over other models in this size range Only Requires Standard 120V Single Phase Circuit, so it can be set up virtually anywhere, without needing additional circuits installed in your work shop 3 Year Warranty, for added peace of mind • Compact, Accurate, Economical Machine. Great for those who are looking for a compact machine for a smaller work shop, yet need the ability to take heavier cuts compared with other machines in this size range • Spindle is Supported by High Precision Tapered Roller Bearings • Mill Head May be Tilted ±90° (both left and right) • Precision Manual Fine Down Feed is standard • Adjustable Tapered Gibs for longer life • Positive Locks are standard for Table, Head, Quill, and Column • Easy Reading Dials Have Satin Chrome Finish, Graduated in .001″ • Quill DRO is Standard, Accuracy of the Display 0.0005”, Selectable from mm/inch • Generous 18-1/4″ Spindle To Table Max Distance for taller work • 8-1/2″ Y Axis Travel, More than other machines in this class STANDARD/INCUDED EQUIPMENT: PM-727M Milling Machine Way Covers Drawbar R8 Spindle Taper Quill DRO Chip Tray MAIN SPECIFICATIONS: Model No.: PM-727M Max. Drilling Capacity: 1-1/4″ Max. End Milling Capacity: 1″ Max. Face Milling Capacity: 3″ Table Size: 27-1/2″ x 7-1/8″ Cross Travel (Y Axis): 8-1/2″ Longitudinal Travel (X Axis): 15″ Table Leadscrew Pitch 10 TPI (.100″ Per Turn) Table Dial Graduations .001″ Vertical Travel (Z Axis): 16″ Max Distance Spindle to Table: 18-1/4″ Taper of Spindle: R-8, w/7/16-20 Drawbar Thread Spindle (Quill) Travel: 3″ T Slot Size: 1/2″(T Slots are slightly less than 1/2″, actual size 12mm, our 1/2″ kit is sized for this machine) Range of Spindle Speeds: 115-1700rpm, 6 Steps Head Tilt: Left & Right ±90° Motor: 1 HP Net Weight (Not Including Base): 475 LBS Net Weight (With Optional Base): 575 LBS Country or Origin: China Power Required: 110/120V, Minimum 15 Amp Circuit, Approx. 5′ cord with standard 120V plug included Dimensions (Assembled on stand): 39″W x 74″H x 30″D Height with head at top of Z travel: 80″ (On Stand) Height with head at normal working height: 75″ (On Stand) Optional Stand Height 32″