HIGHLIGHTS OF THIS MACHINE:

Large 1″ Spindle Bore, larger than most in this size range
Quick Change Spindle Mount, secure mount for both forward and reverse, plus allows chuck changes in seconds! (Please see more information tab below for instructions)
POWER CROSS FEED as well as feed on the carriage – Both in, out, left, and right
AXA Wedge Type Quick Change Tool Post set included, installed, ready for use – Compare with others, most in this class do not even have it available as an option, or require extensive modifications to mount one
Variable Spindle Speeds
Super Quiet Running Machine
Lead screws Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch (.100” Per Turn) on Cross Slide, Compound Slide, and Tailstock for easy Inch measurement readings
Many More great features with this machine, please see below
Backed by an industry leading 3 year warranty

STANDARD/INCLUDED ACCESSORIES:
NOTE -Compare what this lathe model comes with, where other similar sized models sell these all separate or do not even offer them – This is the best deal on a lathe this size out there – Compare Carefully!

100/AXA Series Wedge Type Quick Change Tool Post Set W/ 5 Holders (Turning, Turning/Boring, Knurling, Boring, Parting Holders) – THIS QUICK CHANGE TOOL POST IS MOUNTED ON MACHINE, AND READY TO USE! COMPARE WITH OTHERS, WHERE THIS TYPE OF TOOL POST IS NOT INCLUDED, AND WILL NOT EVEN FIT WITHOUT MAJOR MODIFICATIONS TO THE MACHINE
Power Cross Feed
Upgraded Variable Speed Drive Board
5″ 3 Jaw Chuck (Includes a back plate for 3 jaw chuck, ready to mount on the spindle)
5″ 4 Jaw Chuck (Includes a back plate for 4 jaw chuck, ready to mount on the spindle)
8″ Face Plate
Thread Chasing Dial
Centers for the Tailstock and Headstock
High Quality Electronics
Chip Pan/Oil Tray
Steady Rest
Follow Rest
Right/Left Hand Threading
Inch/Metric Threading
Misc. Hand Tools for operation
Variable Speed Brushless DC Motor, with spindle speeds from 50-2000 RPM
Country of Origin: China
Power Connection Type: Cord, Approx. 5′ Length, includes standard 120V Plug with ground (20A 120V Outlet)

MAIN SPECIFICATIONS:

Model PM-1022V PM-1030V
Motor Type DC Variable DC Variable
Max. Swing Over Bed = 10"
Max. Swing Over Cross Slide = 5-1/2"
Max. Swing in Gap - No Gap
Center Height = 5"
Max. Distance Between Centers = 22"
Face to Tail Stock Spindle Face Max. Distance = 23"
Width of Bed 5.3"
Bed Height 7"
Spindle Bore 1"
Spindle Taper, Internal MT #4
Spindle Mounting System Direct Mount
Spindle Speeds 50-2000RPM 50-2000RPM
Lead Screw Diameter / Pitch 3/4" / 8 TPI
Inch Thread Cutting Range 8-80 TPI, 37 Threads
Metric Thread Cutting Range 0.35-3.0mm Pitch, 21 Threads
Longitudinal Feed Range (Left and Right) 0.0014-0.004 Inches Per Revolution
Cross Feed Range (In and Out) 0.0025-0.014 Inches Per Revolution
Spindle Length Through Headstock
Protruding End to Chuck Mounting Face
Approx. 11-3/4"
Spindle Length Through Headstock
Protruding End to 3 Jaw Chuck Face
Aprrox. 14-5/8"
Cross Slide Travel 5"
Compound Travel 3"
Tail Stock Quill Taper MT #2
Tail Stock Quill Travel 3"
Main Motor Horsepower 1HP
Speed Control Type Variable Speed Variable Speed
Voltage / Phase / Amps 120 Volts, 12 Amps Max.
Length of Machine = 44"
Approximate Shipping Weight = 425 LBS
Approximate Machine Weight = 360 LBS