Machine structure: Precision rack and pinion, direct drive Travel drive method: X,Y, Z simultaneous 3 axes Control method: X,Y, Z simultaneous 3 axis control X-Axis stoke: 122.05" Y-Axis stroke: 61.02" Z-Axis Stroke: 3.54" Maximum work piece size: 120.08" x 60.04" Maximum processing feed rate: 1180 inches per minute Maximum workpiece weight: 2050 lbs. Table pass height: 33.5" Rapid travel speed Single axis: 3345 inches per minute Simultaneous: 4730 inches per minute Minimum command input: 0.001mm/.0001" Drive motor type: intelligent AC servo Machine unit dimensions: 418.5" L x 90.6" H x 183" W Total system weight: 26,325 lbs. Pallet change time: Approximately 25 seconds Pallet changer weight: 4500 lbs. Pallet changer drive mechanism: chain Installation dimensions: 473.4" x 227.7" Floor space requirement: 750 sq. ft. Electrical requirements: 208 VAC +/- 5%, 3 phase, 60 Hz Motion system, CNC control: 71 KVA (Total machine usage) Laser resonator: 202 (Full load Amps) CNC controller specifications Model: Mitsubishi LC20BP2 Type: Self contained-simple dust proof design (mounted on processing machine) CPU: 64 Bit Display unit: 10.4" TFT color LCD touch screen Hard disc drive capacity: 2.0 GB Program memory capacity, standard: 5000m/approximately 2 MB with 400 register able programs CO2 laser control Power control: Output power, frequency duty Operation control: Shutter open/close, beam on/off. Laser gas change, etc. Processing machine control Drive method: X,Y, Z (Simultaneous control) Position detection: encoder Minimum command unit: .001mm/.0001" Program input method: 3.5" floppy, computer link, Ethernet LAN Operation method: Memory operation, HD direct drive Laser resonator specifications Model: Mitsubishi 45CF-R Excitation method: 3-axis cross flow, SD Control method: power feedback Power stability: +/- 1 % Beam mode: Low-order (main component TEM01) Beam outer diameter: 1.02" Beam divergence: Approximately 3.5" or less (total angle) Wave length: 10.6 microns Frequency setting range: 10~3000 Hz Duty range: 0~100 % adjustable Output power adjustable range: 0~100% of rating Resonator unit dimensions: 98.4" long x 71.3" High x 31.5" wide Resonator unit weight: 4850 lbs Rated output power (CW): 4500 watts Composition (CO2:CO:N2:He): 8:4:60:28 Consumption amount: 3 liters per hour Gas sealing time: 24 hours during continuous oscillation